Aircraft Communications Addressing and Reporting System

Example of an ACARS message

In aviation, ACARS (/ˈkɑːrz/; an acronym for Aircraft Communications Addressing and Reporting System) is a digital datalink system for transmission of short messages between aircraft and ground stations via airband radio or satellite. The protocol was designed by ARINC and deployed in 1978,[1] using the Telex format. More ACARS radio stations were added subsequently by SITA.

History of ACARS

Prior to the introduction of datalink in aviation, all communication between the aircraft and ground personnel was performed by the flight crew using voice communication, using either VHF or HF voice radios. In many cases, the voice-relayed information involved dedicated radio operators and digital messages sent to an airline teletype system or successor systems.

Further, the hourly rates for flight and cabin crew salaries depended on whether the aircraft was airborne or not, and if on the ground whether it was at the gate or not. The flight crews reported these times by voice to geographically dispersed radio operators. Airlines wanted to eliminate self-reported times to preclude inaccuracies, whether accidental or deliberate. Doing so would also reduce the need for human radio operators to receive the reports.

In an effort to reduce crew workload and improve data integrity, the engineering department at ARINC introduced the ACARS system in July 1978, as essentially an automated time clock system. Teledyne Controls produced the avionics and the launch customer was Piedmont Airlines. The original expansion of the abbreviation was "Arinc Communications Addressing and Reporting System".[2] Later, it was changed to "Aircraft Communications, Addressing and Reporting System". The original avionics standard was ARINC 597, which defined an ACARS Management Unit consisting of discrete inputs for the doors, parking brake and weight on wheels sensors to automatically determine the flight phase and generate and send as telex messages. It also contained a MSK modem used to transmit the reports over existing VHF voice radios. Global standards for ACARS were prepared by the Airlines Electronic Engineering Committee (AEEC). The first day of ARINC operations saw about 4,000 transactions, but ACARS did not experience widespread use by the major airlines until the 1980s.

Early ACARS systems were extended over the years to support aircraft with digital data bus interfaces, flight management systems, and printers.

System description and functions

ACARS as a term refers to the complete air and ground system, consisting of equipment on board, equipment on the ground, and a service provider.

On-board ACARS equipment[3] consists of end systems with a router, which routes messages through the air-ground subnetwork.

Ground equipment is made up of a network of radio transceivers managed by a central site computer called AFEPS (Arinc Front End Processor System), which handles and routes messages. Generally, ground ACARS units are either government agencies such as the Federal Aviation Administration, an airline operations headquarters, or, for small airlines or general aviation, a third-party subscription service. Usually government agencies are responsible for clearances, while airline operations handle gate assignments, maintenance, and passenger needs.

The Ground Processing System

Ground System provision is the responsibility of either a participating ANSP or an Aircraft Operator. Aircraft Operators often contract out the function to either DSP or to a separate service provider. Messages from aircraft, especially automatically generated ones, can be pre-configured according to message type so that they are automatically delivered to the appropriate recipient just as ground-originated messages can be configured to reach the correct aircraft.

The ACARS equipment on the aircraft is linked to that on the ground by the datalink service provider. Because the ACARS network is modeled after the point-to-point telex network, all messages come to a central processing location to be routed. ARINC and SITA are the two primary service providers, with smaller operations from others in some areas. Some areas have multiple service providers.

ACARS message types

ACARS messages may be of three broad types:

Control messages are used to communicate between the aircraft and its base, with messages either standardized according to ARINC Standard 633, or user-defined in accordance with ARINC Standard 618.[5] The contents of such messages can be OOOI events, flight plans, weather information, equipment health, status of connecting flights, etc.

OOOI events

A major function of ACARS is to automatically detect and report the start of each major flight phase, called OOOI events in the industry (out of the gate, off the ground, on the ground, and into the gate).[6] These OOOI events are detected using input from aircraft sensors mounted on doors, parking brakes, and struts. At the start of each flight phase, an ACARS message is transmitted to the ground describing the flight phase, the time at which it occurred, and other related information such as the amount of fuel on board or the flight origin and destination. These messages are used to track the status of aircraft and crews.

Flight management system interface

ACARS interfaces with FMS flight management systems, acting as the communication system for flight plans and weather information to be sent from the ground to the FMS. This enables the airline to update the FMS while in flight, and allows the flight crew to evaluate new weather conditions or alternative flight plans.

Equipment health and maintenance data

ACARS is used to send information from the aircraft to ground stations about the conditions of various aircraft systems and sensors in real-time. Maintenance faults and abnormal events are also transmitted to ground stations along with detailed messages, which are used by the airline for monitoring equipment health, and to better plan repair and maintenance activities.

Ping messages

Automated ping messages are used to test an aircraft's connection with the communication station.[7] In the event that the aircraft ACARS unit has been silent for longer than a preset time interval, the ground station can ping the aircraft (directly or via satellite). A ping response indicates a healthy ACARS communication.

Manually sent messages

ACARS interfaces with interactive display units in the cockpit, which flight crews can use to send and receive technical messages and reports to or from ground stations, such as a request for weather information or clearances or the status of connecting flights. The response from the ground station is received on the aircraft via ACARS as well. Each airline customizes ACARS to this role to suit its needs.

Communication details

ACARS messages may be sent using a choice of communication methods, such as VHF or HF, either direct to ground or via satellite, using minimum-shift keying (MSK) modulation.[8]

ACARS can send messages over VHF if a VHF ground station network exists in the current area of the aircraft. VHF communication is line-of-sight propagation and the typical range is up to 200 nautical miles at high altitudes. Where VHF is absent, an HF network or satellite communication may be used if available. Satellite coverage may be limited at high latitudes (trans-polar flights).

Sample ACARS VHF transmission
The sound of an ACARS VHF transmission made on 130.025 MHz, recorded at Petaluma, California on 15 August 2006. The short "beep" at the beginning of the message is composed of 16 bytes at 2400 Hz, which is the "alert" preamble in the protocol.[9] The balance of the message which sounds like radio static is the actual data stream of the message.

Problems playing this file? See media help.
A typical ACARS VHF transmission.
Mode A
Aircraft B-18722
Ack NAK
Block id 2
Flight CI5118
Label B9
Msg No. L05A
Message /KLAX.TI2/024KLAXA91A1

Role of ACARS in air accidents and incidents

In the wake of the crash of Air France Flight 447 in 2009, there was discussion about making ACARS an "online-black-box"[10] to reduce the effects of the loss of a flight recorder. However no changes were made to the ACARS system.

In March 2014, ACARS messages and Doppler analysis of ACARS satellite communication data played a very significant role in efforts to trace Malaysia Airlines Flight 370 to an approximate location. While the primary ACARS system on board MH370 had been switched off, a second ACARS system called Classic Aero was active as long as the plane was powered up, and kept trying to establish a connection to an Inmarsat satellite every hour.[11]

The ACARS on the Airbus A320 of EgyptAir flight MS804 reported "irregularities" to ground staff on three separate occasions, which led to three emergency landings, in the 24 hours prior to the aircraft's crash into the Mediterranean Sea on May 19, 2016, which killed all 66 persons on board. The specific nature of the irregularities was not explained, but at each instance the aircraft was given clearance to continue its flight.[12]

Uses of ACARS outside aviation

In 2002, ACARS was added to the NOAA Observing System Architecture. Thus commercial aircraft can act as weather data providers for weather agencies to use in their forecast models, sending meteorological observations like winds and temperatures over the ACARS network. NOAA provides real-time weather maps.

See also

References

  1. Carlsson, Barbara (October 2002). "GLOBALink/VHF: The Future Is Now" (PDF). The Global Link (Press release). p. 4. Archived from the original (PDF) on 11 February 2006. Retrieved 24 January 2007.
  2. "ARINC Communications Addressing and Reporting System" (PDF). Archived from the original (PDF) on 6 July 2011. Retrieved 22 September 2011.
  3. "ARINC Characteristic 758-2 Communications Management Unit (CMU) Mark 2". ARINC. July 2005. Retrieved 27 March 2014.
  4. "ARINC Specification 623-3Character-Oriented Air Traffic Service (ATS) Applications". ARINC. April 2005. Retrieved 28 March 2014.
  5. "ARINC Specification 618-7 Air/Ground Character-Oriented Protocol Specification". ARINC. June 2013. Retrieved 28 March 2014.
  6. "OOOI Data". FAA.
  7. Hoppenbrouwers, Jeroen. "ACARS documentation". ACARS. Retrieved 26 March 2014.
  8. Tooley, Michael H.; Wyatt, David (2007). Aircraft communications and navigation systems: Principles, operation and maintenance. Amsterdam: Elsevier/Butterworth-Heineman. ISBN 978-0750681377. Retrieved 23 March 2014.
  9. Anderson, Lionel K. (2010). ACARS – A Users Guide. Las Atalayas. p. 5. ISBN 978-1-4457-8847-0. Retrieved 24 March 2014.
  10. "Online-Black-Box soll Crashs schneller aufklären" [Online Black Box to solve crashes faster]. Spiegel-Online (in German). 6 June 2009. Retrieved 6 June 2009.
  11. Rayner, Gordon; Collins, Nick. "MH370: Britain finds itself at centre of blame game over crucial delays". The Telegraph. UK. Retrieved 28 March 2014.
  12. Sinclair, Harriet (2 June 2016). "EgyptAir MS804: Doomed plane made 3 emergency landings in day before crash reports France 3 TV". International Business Times. UK. Retrieved 4 June 2016.

External links

This article is issued from Wikipedia - version of the 10/6/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.