Arcadia (engineering)

ARCADIA, a model-based engineering method for systems, hardware and software architectural design.

ARCADIA (ARCHITECTURE ANALYSIS & DESIGN INTEGRATED APPROACH) is a system & software architecture engineering method, based on architecture-centric and model-driven engineering activities.

History

In the development cycle of a system, former practices focused more on the definition of requirements, their allocation to each component of the system component and associated traceability. Current approaches rather focus on functional analysis, system design, justification of architectural choices and verification steps. In addition, the design takes into account not only the functional point of view, but also other points of view, which affect the definition and breakdown of the system. For example, constraints relating to system integration, product line management, safety, performance and feasibility. Systems engineering is therefore not just about managing the system requirements, but is a complex design activity.

As an answer to this challenge, the ARCADIA method was created by Thales in 2007, placing architecture and collaboration at the center of systems engineering practices.

The vision for ARCADIA was to break the "walls" between different engineering specializations including architects, development teams, Specialists, IVVQ Teams, Customer and external partners.

Starting in September 2015, the method is being developed in a standard under AFNOR, through the French CLARITY[1] project supported by the Banque Publique d’Investissement (Bpifrance[2]).

Context

The ARCADIA method applies to the design of complex and critical systems, and more generally architectures that are subject to multiple functional and non-functional constraints, including software, electronic, electrical architectures, and industrial processes. It defines a set of practices that guides needs analysis and design to meet an operational requirement. At the same time it is adaptable to the processes and constraints linked to various types of life cycles such as bottom-up approach, application reuse, incremental, iterative and partial development.

Objectives and Action Means

ARCADIA is a structured engineering method to identify and check the architecture of complex systems. It promotes collaborative work among all stakeholders during many of the engineering phases of the system. It allows iterations during the definition phase that help the architects to converge towards satisfaction of all identified needs.

Even if textual requirements are kept as a support for part of customer need capture, ARCADIA favors functional analysis as the major way to formalize the need and solution behavior. This includes operational, functional and non-functional aspects, along with resulting definition of the architecture, based on - and justified against - this functional analysis.

ARCADIA is based on the following general principles:

The ARCADIA method is tooled through Capella, a modeling tool that meets full-scale deployment constraints in an operational context. Capella is available free of charge from the engineering community under open source.

Feature Summary

The ARCADIA method:

Methodological Approach

Viewpoints
Viewpoints
Collaboration
Collaboration

One of the difficulties frequently encountered in the development of complex systems comes from the superposition of several partially independent functional chains using shared resources (including but not limited to computing resources). The ARCADIA method and the underlying tools are used to identify functional chains, their overlapping scenarios and desired performance, along with their support by the architecture. Starting with the first level of system analysis, they ensure traceability throughout the process definition and check each proposed architectural design against expected performance and constraints.

The non-functional properties expected from the system solution are also formalized in 'viewpoints'. Each viewpoint captures constraints that the system should face or meet (feared events, security threats, latency expectations, product line or reuse constraints, power consumption or cost issues, and more). Then the architecture model is automatically analyzed to verify that it meets these constraints, thanks to dedicated expert rules (performance computation, resource consumption, safety or security barriers, etc.). This analysis can be done very early in the development cycle, detecting design issues as soon as possible ("early validation").

As a summary, the approach to characterization by views (or "viewpoints") cross-checks that the proposed architecture is capable of providing the required functions with the desired level of performance, security, dependability, mass, scalability, environments, mass, interfaces, etc. ensuring the consistency of engineering decisions, because all engineering stakeholders share the same engineering information, and can apply his/her own views and checks to them, so as to secure the common definition.

Presentation of the Approach and Key Concepts

The first level views used to elaborate and share the architecture model are described below:

The first step focuses on analysing the customer needs and goals, expected missions & activities, far beyond System/SW requirements. This is expected to ensure good adequacy of System/SW definition with regards to its real operational use – and define IVVQ conditions. Outputs of this step consist mainly in an "operational architecture" describing and structuring this need, in terms of actors/users, their operational capabilities and activities, operational use scenarios giving dimensioning parameters, operational constraints including safety, security, lifecycle, etc.

The second step focuses now on the system/SW itself, in order to define how it can satisfy the former operational need, along with its expected behaviour and qualities: system/SW functions to be supported & related exchanges, non functional constraints (safety, security…), performances allocated to system boundary, role sharing and interactions between system and operators… It also checks for feasibility (including cost, schedule and technology readiness) of customer requirements, and if necessary gives means to renegotiate their contents. To do this, a first early system/SW architecture (architectural design model) is sketched, from system/SW functional need; then requirements are examined against this architecture in order to evaluate their cost and consistency. Outputs of this step mainly consist of system/SW functional Need description, interoperability and interaction with the users and external systems (functions, exchanges plus non-functional constraints), and system/SW requirements.

Note that these two steps, which constitute the first part of Architecture building, "specify" the further design, and therefore should be approved/validated with the customer.

The third step intends to identify the system/SW parts (hereafter called components), their contents, relationships and properties, excluding implementation or technical/technological issues. This constitutes the system/SW logical architecture. In order for this breakdown in components to be stable in further steps, all major [non-functional] constraints (safety, security, performance, IVV, Cost, non technical, etc.) are taken into account and compared to each other's so as to find the best compromise between them. This method is described as "Viewpoints-driven", viewpoints being the formalization of the way these constraints impact the system/SW architecture. Outputs of this step consist of the selected logical architecture: components & interfaces definition, including formalization of all viewpoints and the way they are taken into account in the components design. Since the architecture has to be validated against Need, links with requirements and operational scenarios are also produced.

The fourth step has the same intents as logical architecture building, except that it defines the “final” architecture of the system/SW at this level of engineering, ready to develop (by lower engineering levels). Therefore, it introduces rationalization, architectural patterns, new technical services and components, and makes the logical architecture evolve according to implementation, technical & technological constraints & choices (at this level of engineering). Note that the same "Viewpoints-driven" method as for logical architecture building is used for physical architecture definition. Outputs of this step consist of the selected physical architecture: components to be produced, including formalization of all viewpoints and the way they are taken into account in the components design. Links with requirements and operational scenarios are also produced.

The fifth and last step is a contribution to EPBS (End-Product Breakdown Structure) building, taking benefits from the former architectural work, to enforce components requirements definition, and prepare a secured IVVQ. All choices associated to the system/SW chosen architecture, and all hypothesis and constraints imposed to components and architecture to fit need and constraints, are summarized and checked here. Outputs from this step are mainly "component Integration contract" collected all necessary expected properties for each component to be developed.

The following figure shows a global view summarizing the recommended technical process, featuring the three elements of the engineering triptych, and their production activities all along the definition and design process.

ARCADIA engineering phases
Breakdown

Communication

As part of the Clarity Project, a book on the ARCADIA method will be published. An introductory document is currently available for download on the Capella website.[3]

The ARCADIA method was presented at various events:

Conference Title Date Place
MODELS'16 ARCADIA in a nutshell[4] 02/10/2016 Saint Malo
INCOSE International Symposium Implementing the MBSE Cultural Change: Organization, Coaching and Lessons Learned[5] 14/07/2015 Seattle
INCOSE International Symposium From initial investigations up to large-scale rollout of an MBSE method and its supporting workbench: the Thales experience[6] 14/07/2015 Seattle
EclipseCon France Systems Modeling with the ARCADIA method and the Capella tool[7] 24/06/2015 Toulouse
Model-Based System Engineering (MBSE) Symposium The Challenges of Deploying MBSE Solutions[8] 28/10/2014 Canberra
Model-Based System Engineering (MBSE) Symposium Arcadia and Capella in the Field[9] 27/10/2014 Canberra
EclipseCon France Arcadia / Capella, a field-proven modeling solution for system and software architecture engineering[10] 19/06/2014 Toulouse
MDD4DRES ENSTA Summer school Feedbacks on System Engineering – ARCADIA, a model-based method for Architecture-centric Engineering[11] 01/09/2014 Aber Wrac'h
EclipseCon North America Arcadia / Capella, a field-proven modeling solution for system and software architecture engineering[12] 20/03/2015 San Francisco
Complex Systems Design & Management (CSDM) ARCADIA: Model-Based Collaboration for System, Software and Hardware Engineering[13] 04/12/2013 Paris
Congrès Ingénierie grands programmes et systèmes complexes La modélisation chez Thales : un support majeur à la collaboration des acteurs dans l’ingénierie des grands systèmes[14] 10/06/2013 Arcachon
MAST Toward integrated multi-level engineering - Thales and DCNS advanced Practices[15] 04/06/2013 Gdańsk
CSDM Modelling languages for Functional Analysis put to the test of real life[16] 2012 Paris
ICAS Method and tools to secure and support collaborative architecting of constrained systems[17] 2010 Nice
CSDM Model-driven Architecture building for constrained Systems[18] 2010 Paris
INCOSE’08 Symposium Method & Tools for constrained System Architecting[19] 2008 Utrecht

See also

References

  1. "Ecosystem for the Model Based Systems Engineering Solution Capella". Retrieved 2015-10-23.
  2. "Bpifrance website". Retrieved 2015-10-23.
  3. "ARCADIA introductory document". Retrieved 2015-10-23.
  4. "ARCADIA in a nutshell". Retrieved 2016-10-06.
  5. "Implementing the MBSE Cultural Change: Organization, Coaching and Lessons Learned". Retrieved 2015-10-23.
  6. "From initial investigations up to large-scale rollout of an MBSE method and its supporting workbench: the Thales experience". Retrieved 2015-10-23.
  7. "Systems Modeling with the ARCADIA method and the Capella tool". Retrieved 2015-10-23.
  8. "The Challenges of Deploying MBSE Solutions". Retrieved 2015-10-23.
  9. "Arcadia and Capella in the Field". Retrieved 2015-10-23.
  10. "Arcadia / Capella, a field-proven modeling solution for system and software architecture engineering". Retrieved 2015-10-23.
  11. "Feedbacks on System Engineering – ARCADIA". Retrieved 2015-10-22.
  12. "Arcadia / Capella, a field-proven modeling solution for system and software architecture engineering". Retrieved 2015-10-23.
  13. "Model-Based Collaboration for System, Software and Hardware Engineering". Retrieved 2015-10-23.
  14. "La modélisation chez Thales : un support majeur à la collaboration des acteurs dans l'ingénierie des grands systèmes" (PDF). Retrieved 2015-10-23.
  15. "Toward integrated multi-level engineering - Thales and DCNS advanced Practices". Retrieved 2015-10-23.
  16. "Modelling languages for Functional Analysis put to the test of real life". Retrieved 2015-10-23.
  17. "Method and tools to secure and support collaborative architecting of constrained systems". Retrieved 2015-10-23.
  18. "Model-driven Architecture building for constrained Systems". Retrieved 2015-10-23.
  19. "Method & Tools for constrained System Architecting". Retrieved 2015-10-23.

External links

Look up arcadia (engineering) in Wiktionary, the free dictionary.
This article is issued from Wikipedia - version of the 10/6/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.