Ascari KZ1

Ascari KZ1
Overview
Manufacturer Ascari
Production 2003present
Body and chassis
Class Sports car
Body style Berlinetta
Layout Longitudinal RMR layout
Powertrain
Engine 5.0L BMW S62 V8
Transmission 6-speed manual
Dimensions
Length 4,300 mm (169.3 in)
Width 1,852 mm (72.9 in)
Height 1,138 mm (44.8 in)
Curb weight 1,350 kg (2,976 lb)
Chronology
Predecessor Ascari Ecosse
Successor Ascari A10
Interior of the KZ1.

The Ascari KZ1 is a sports car made by Ascari. It can reach 201 mph (323 km/h),[1] and is powered by a highly tuned BMW S62, a 4941cc V8 engine originally used in the E39 M5 and Z8. It can accelerate from 0 to 60 mph (97 km/h) in 3.7s and to 100 mph (160 km/h) in 8.0s. The car is named from the initials of Ascari's owner Klaas Zwart, a wealthy Dutch businessman.

Each car is priced at £235,000 and requires 340 hours of handcrafting. Owners also receive the opportunity to drive the car at the Ascari-managed Race Resort Ascari in Spain.

The KZ1 was featured in November 2005 on the BBC television show Top Gear, where it set the 5th fastest lap time ever recorded on the show at 1 minute 20.7 seconds; currently, the KZ1 holds 26th place, the seventh-fastest time being 1:17.3 set by an Ascari A10.

Specifications

Engine S62 BMW V8 with dry sump lubrication
Position Mid-longitudinal
Aspiration natural
Valvetrain 4 valves per cylinder with variable valve timing
Displacement 4941 cc (302.1 in3)
Bore 94 mm (3.7 in)
Stroke 89 mm (3.5 in)
Power 500 bhp (373 kW; 507 PS) @ 7000 rpm
Power to displacement 101 hp per litre (75.5 kW/L)
Power to weight 420 bhp per long ton (280 W/kg)
Torque 550 N·m (406 lb·ft) @ 4500 rpm
Transmission 6-speed manual
0-60 mph 3.7 seconds
0-100 mph 8.0 seconds
1/4 Mile 11.8 seconds at 124 mph (200 km/h)

Ascari KZ1-R

Ascari KZ1-R[2]
Overview
Manufacturer Ascari
Production 2005present
Body and chassis
Class Sports car
Body style Berlinetta
Powertrain
Engine 5.0L BMW S62 V8
Transmission 6-speed manual
Dimensions
Length 4,300 mm (169.3 in)
Width 1,852 mm (72.9 in)
Height 1,138 mm (44.8 in)
Curb weight 1,253 kg (2,762 lb)
Chronology
Predecessor Ascari KZ1
Successor Ascari A10

Modifications

The Ascari KZ1 has been adapted for racing, primarily being featured in the new FIA GT3 European Championship and the used United SportsCar Championship as well as other smaller national series which run a similar formula. These cars, known as the KZ1-R,are similar to the KZ1, but vastly improved. The most obvious differences between the KZ1 and KZ1-R lie on the exterior of the car. Tuned for racing, the KZ1-R is still a pure road car in every right, but with the invigoration of a GT3 racer. The front lip spoiler has been updated with a pronounced splitter for increased down-force. Also unlike the KZ1, the race version features a larged fixed racing wing, in place of the small spoiler. The headlights have been stripped down to the essentials, with HID bulbs and turn signals, losing the silver and crystallized look of the KZ1. The rear fenders of the car have also been increased slightly to house the larger wheelbase. The wheels are forged aluminum alloy, to further reduce curb weight. The interior of the car has been completely stripped. Power windows and seating have been removed. Fine leather is replaced by alcantara, cloth, and carbon fiber racing seats. Much of the interior is made of carbon fiber, and what isn't is either plastic or aluminum. Replacing these creature comforts is and integral roll cage, which adds rigidity to the car's body during races. The KZ1-R is stripped its luxury but not without a benefit. Curb weight is reduced to an astounding 1250 kg(), which is helped by its carbon fiber monocoque chassis and body shell. Ascari plans to only produce 50 specimens of the KZ1-R model.[3]

Engine

The KZ1-R uses the same mid-mounted, naturally-aspirated, dry sump BMW S62 90-degree V8, but it has been tuned for a total of 520 bhp (388 kW; 527 PS)[4] at 7000 rpm. Displacement stays the same at 4941 cc (301.5 in3), with torque at 550 N·m (410 lb·ft) at 4500 rpm. This allows the KZ1-R to produce 416 bhp (310 kW; 422 PS) per tonne.

Chassis

The KZ1-R uses a six-speed manual gearbox with a standard clutch and shift-lever, mounted to a carbon fiber monocoque chassis and a tubular steel rear frame. Both front and rear suspension are double-wishbone with coil over dampers, mated to anti-roll bars for stability. The wheels are 19-inch (483 mm) forged aluminum racing wheels mounted to 305/30x19 tires in the rear and 235/35x19 tires in the front. The front brakes are cross-drilled and vented with 6-piston racing-type calipers in the front and four-piston calipers in the rear brakes. Fortunately, the KZ1-R retains power steering, a feature that is sometimes absent from race cars.

Gear123456Final Drive
Ratio2.875:11.773:11.267:11.000:10.833:10.621:13.70:1

Performance

The KZ1-R can accelerate from 0-62 mph (0–100 km/h) in 3.8 seconds, thanks to its increased power-to-weight ratio. Ascari claims that it will reach 100 mph(160 km/h)in 8.0 seconds. The eight-cylinder M5 engine will continue to push the KZ1 to a non-limited top speed of 201 mph (321.9 km/h). The racing model manages to reach 62 mph (100 km/h) in about four-tenths of a second less than the standard KZ1, with numbers comparable to the Lamborghini Murcielago LP640.

References

  1. "Archived copy". Archived from the original on 2007-08-19. Retrieved 2007-05-21.
  2. Ascari KZ1-R Data
  3. Ascari.net
  4. "Archived copy". Archived from the original on 2010-11-01. Retrieved 2010-10-25.

External links

Wikimedia Commons has media related to Ascari KZ1.
This article is issued from Wikipedia - version of the 10/28/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.