British Rail Class 110

British Rail Class 110
(BRCW Calder Valley)
In service 1961 – 1988
Manufacturer BRCW
Constructed 1961–1962
Refurbishment 1979-80
Scrapped 1988
Number built 30 sets
Number preserved One 3-car set, One 2-car set
Formation Three-car sets: DMBC-TSL-DMCL
(TSL removed from many sets in 1982)
Capacity DMBC: 12 first, 33 second
TSL: 72 second
DMCL: 12 first 54 second
Operator(s) British Rail
Specifications
Car length 57 ft 6 in (17.53 m)
Width 9 ft 3 in (2.82 m)
Height 12 ft 9 in (3.89 m)
Maximum speed 70 mph (113 km/h)
Weight DMBC: 32 long tons 0 cwt (71,700 lb or 32.5 t)
TSL: 24 long tons 0 cwt (53,800 lb or 24.4 t)
DMCL: 31 long tons 10 cwt (70,600 lb or 32 t)
Prime mover(s) Two Rolls-Royce C6NFLH engines per power car
Power output 720 hp (537 kW) per set
180 bhp (130 kW) per engine
Transmission 4-speed epicyclic gearbox
UIC classification (1A)′(A1)′+2′2′+(1A)′(A1)′
Braking system(s) Vacuum
Safety system(s) AWS
Coupling system Screw-link
Multiple working Blue Square
Track gauge 4 ft 8 12 in (1,435 mm)

The Class 110 diesel multiple units were built by the Birmingham Railway Carriage and Wagon Company in conjunction with the Drewry Car Co. to operate services on the former Lancashire and Yorkshire main line. They saw service uniquely is this region, which earned them the name of the 'Calder Valley' sets. They were an updated version of the Class 104, with a revised cab design and raised bodyside window frames.

Description

The arduous Calder Valley route meant they needed more power than most sets, so they were fitted with 180 hp (130 kW) Rolls-Royce C6NFLH engines, and when delivered they had the highest hp/ton of any of the DMUs, including the lightweights. With a set weighing 87½ tons (tare), this gave a power-to-weight ratio of 8.3 hp / ton, which was appreciably higher than any other all-diesel sets in use at the time using normally aspirated engines. Performance tests included a standing start against a ruling gradient of 1 in 261 and a set in tare condition achieved a speed of 30 mph (48 km/h) in 45 seconds, 50 mph (80 km/h) in 2 minutes 4 seconds, and 70 mph (110 km/h) in 4 minutes 6 seconds. From a standing start on a 1 in 45 gradient a speed of 25 mph (40 km/h) in third gear was reached in 42 seconds. Each set had 24 first class and 159 second class seats.

Timeline

The first twenty sets, for the NER, were ordered in March 1959 and were allocated to Bradford Hammerton Street depot. The second batch were allocated to the LMR in January 1961, based at Newton Heath in Manchester. Deliveries of the two batches was concurrent, starting in 1961, and these were the penultimate class of first generation sets to be built.

All sets were concentrated at Hammerton Street by 1976.

Refurbishment of the class took place in 1979 - 1980, with fluorescent lighting, new seat covers, new internal panelling and mechanical modifications to reduce the occurrence of the fires in the exhaust system which were common on many classes of first generation DMU.

During refurbishment the class was repainted, first in the white livery with a blue stripe below the windows that was standard for refurbished DMUs and later in the standard British Rail blue and Grey livery. All sets that were turned out in the white livery were later repainted in blue and Grey.

The TSLs were removed from most sets and scrapped in 1982 to reduce maintenance costs and to allow a higher performance for an accelerated timetable on the Calder Valley line. At 11.2 hp/ton these sets now had by far the highest power/weight ratio of any first generation DMU, but with a significantly reduced capacity of just 111 seats.

At the same time all First Class seats were declassified to Second although the seats were not replaced.

The reduced capacity was a problem with the upturn in traffic of the mid 1980s and some sets were supplemented in 1984-85 with centre cars from withdrawn Class 111 units.

Hammerton Street depot closed in 1984, and all remaining Class 110 units were transferred to Neville Hill in Leeds.

The small fleet size together with maintenance costs of the non-standard Rolls Royce engines ensured their early withdrawal. The engines were mounted with cylinder heads facing inwards, unlike all other DMU classes, and this required specialised facilities for engine removal which were only available at their home depot. Class 150/2 'Sprinters' were introduced on the Calder Valley route in 1986.

Some displaced units continued in traffic until October 1989, but were no longer common in the Calder Valley.

Orders

Lot
No.
Diagram Car type Qty
Fleet number Notes
30592 564 Driving Motor Brake Composite (DMBC) 20 51809–51828
30593 563 Drving Motor Composite with lavatory (DMCL) 20 51829–51848
30594 648 Trailer Second with lavatory (TSL) 20 59693–59712
30691 564 Driving Motor Brake Composite (DMBC) 10 52066–52075
30692 563 Drving Motor Composite with lavatory (DMCL) 10 52076–52085
30693 648 Trailer Second with lavatory (TSL) 10 59808–59817

Preservation

Five vehicles are preserved:

Set number Vehicle numbers Livery Location Notes
DMBC TSL DMCL
- 51813 - 51842 BR Green Wensleydale Railway Operational
- 52071 - 52077 BR Green Lakeside and Haverthwaite Railway Operational
- - 59701 - BR Green East Lancashire Railway Operational

References

Wikimedia Commons has media related to British Rail Class 110.
This article is issued from Wikipedia - version of the 11/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.