Contact image sensor

CIS of a flatbed scanner

Contact Image Sensors (CIS) are image sensors used in flatbed scanners almost in direct contact with the object to be scanned. CCDs, often used for this application, use mirrors to bounce light to a stationary sensor. CISs are much smaller than CCDs, use typically a tenth as much power, and are particularly suitable for low power and portable applications, often powered over USB.[1]

Scanner unit with CIS. A: assembled, B: disassembled; 1: housing, 2: light conductor, 3: lenses, 4: chip with two RGB-LEDs, 5: CIS

A CIS typically consists of a linear array of detectors, covered by focusing lenses and flanked by red, green, and blue LEDs for illumination. The use of LEDs allows the CIS to be highly power efficient, allowing scanners to be powered through the minimal line voltage supplied via a USB connection. CIS devices typically produce lower image quality compared to CCD devices; in particular, the depth of field is greatly limited, which poses a problem for material that is not perfectly flat. However, a CIS contact sensor is smaller and lighter than a CCD line sensor, and allows all the necessary optical elements to be included in a compact module, thus helping to simplify the inner structure of the scanner. With a CIS contact sensor, the scanner can be portable, with a height of only around 30 mm. CIS is both a key component of, and widely used in, scanners (especially portable scanners), electrographs, bar code readers and optical identification technology.

References

  1. "Canon CIS technology overview". Retrieved Jan 25, 2012.


This article is issued from Wikipedia - version of the 10/24/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.