Corin Dam

Corin Dam

Corin Reservoir, 2009
Location of the Corin Dam in the ACT
Country Australia
Location Australian Capital Territory
Coordinates 35°33′55″S 148°49′52″E / 35.56541°S 148.83108°E / -35.56541; 148.83108Coordinates: 35°33′55″S 148°49′52″E / 35.56541°S 148.83108°E / -35.56541; 148.83108
Purpose Potable water supply
Status Operational
Opening date 1968 (1968)
Owner(s) ACTEW Corporation
Dam and spillways
Type of dam Embankment dam
Impounds Cotter River
Height 74 m (243 ft)
Length 282 m (925 ft)
Dam volume 1,394×10^3 m3 (49×10^6 cu ft)
Spillways 1
Spillway type Uncontrolled side channel
Spillway capacity 1,190 m3/s (42,000 cu ft/s)
Reservoir
Creates Corin Reservoir
Total capacity 75,500 ML (1.66×1010 imp gal; 1.99×1010 US gal)
Active capacity 70,800 ML (1.56×1010 imp gal; 1.87×1010 US gal)
Catchment area 197 km2 (76 sq mi)
Surface area 315 ha (780 acres)
Normal elevation 956 m (3,136 ft)
Website
Corin Dam at ACTEW Water

The Corin Dam is an earth and rockfill embankment dam with an uncontrolled side channel spillway across the Cotter River, located within Namadgi National Park in the Australian Capital Territory, Australia. The impounded reservoir is called the Corin Reservoir which is a supply source of potable water for the city of Canberra and its environs. It is named after William Corin (1867-1929),[1] a pioneer in hydroelectric development in Australia.

Location and features

Constructed by Thiess Bros Pty Limited working from designs prepared by the Commonwealth Department of Works, the Corin Dam was completed and opened in 1968. The earthen dam wall built on a rock foundation is 74 metres (243 ft) high and 282 metres (925 ft) long with a volume of 1,394 thousand cubic metres (49.2×10^6 cu ft). The wall impounds 75,500 megalitres (1.66×1010 imp gal; 1.99×1010 US gal) of water held within the Corin Reservoir, forming a surface area of approximately 3.15 square kilometres (1.22 sq mi) drawn from a catchment area of 197 square kilometres (76 sq mi).[2] The uncontrolled side channel spillway is capable of discharging 1,190 cubic metres per second (42,000 cu ft/s) from the reservoir,[2] with a high water level approximately 955.54 metres (3,135 ft) above sea level.[3]

Water from the Corin, together with the Bendora (downstream), and the Cotter dams (further downstream) are pumped to the suburbs of Canberra via the Bendora Gravity Main.

See also

References

  1. Entry for Willima Corin in Pike, Douglas (1996). Australian dictionary of biography volumes 1-12, 1788-1939. Carlton, Vic.: Melbourne University Press. pp. (Vol 8) 115–6. ISBN 0522846548.
  2. 1 2 "Register of Large Dams in Australia" (Excel (requires download)). Dams information. Australian National Committee on Large Dams. 2010. Retrieved 4 April 2014.
  3. "Corin Dam". ACTEW Water. ACTEW Corporation. 2011. Retrieved 4 April 2014.

Media related to Corin Dam at Wikimedia Commons

This article is issued from Wikipedia - version of the 11/19/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.