DRG Class 24

DRG Class 24
Quantity 95
Manufacturer Schichau, Hanomag, Henschel, Krupp, Borsig
Year(s) of manufacture 1928 - 1939
Retired 1972
Wheel arrangement 2-6-0
Axle arrangement 1'C h2
Type P 34.15
Gauge 1,435 mm (4 ft 8 12 in)
Length over buffers 16,955 mm (55 ft 8 in)
Service weight 562.9 kN (126,500 lbf)
Adhesive weight 443.3 kN (99,700 lbf)
Axle load 148.1 kN (33,300 lbf)
Top speed 90 km/h (56 mph)
Indicated Power 920 PS (677 kW; 907 hp)
Driving wheel diameter 1,500 mm (59.06 in)
Leading wheel diameter 850 mm (33.46 in)
Valve gear Walschaerts with Kuhn slides
Cylinder bore 500 mm (19.69 in)
Piston stroke 660 mm (25.98 in)
Boiler Overpressure 137 N/cm2 (199 psi)
Grate area 2.04 m2 (22.0 sq ft)
Superheater area 37.34 m2 (401.9 sq ft)
Evaporative heating area 104.48 m2 (1,124.6 sq ft)
Tender 3T 16 and 3T 17 (The DB's 24 061 had a 2`2 T26)
Water capacity 16 m2 (170 sq ft)
Fuel 6 t (5.9 long tons; 6.6 short tons) coal
Brakes automatic, single-chamber, Knorr compressed-air brakes, operating on coupled and carrying wheels from the front
Auxiliary brake yes
Parking brake yes

The DRG Class 24 steam engines were German standard locomotives (Einheitslokomotiven) built for the Deutsche Reichsbahn between 1928 and 1939 to haul passenger trains.

History

These engines, nickname the 'prairie horse' (Steppenpferd) were developed specially for the long, flat routes in West and East Prussia. 95 examples were built by the firms of Schichau, Linke-Hofmann and others. The two units with operating numbers 24 069 and 24 070 were supplied by Borsig with a medium pressure boiler. These locos ran with a boiler overpressure of 245.1 N/cm2 (355.5 psi), but were rebuilt in 1952.

The Deutsche Bundesbahn took over 38 locomotives and retired them by 1966. The last one with the DB was locomotive number 24 067, which was stabled in Rheydt and taken out of service there in August 1966. The engines were given operating numbers 24 001 to 24 095.

Engine numbers 24 002, 004, 009, 021 and 030 were left with the DR after the Second World War. They were all stabled in Jerichow shed in 1960 and their sphere of operations until 1968 was the branch line network of the Kleinbahn AG in Genthin. No. 24 009 was re-numbered in 1970 to 37 1009 and was used as a reserve breakdown engine in Güsten and Stendal. In 1972 it was sold to the West German railway magazine Eisenbahn-Kurier.

Thirty-four locomotive remained in Poland after the Second World War, where PKP classified them as Oi2. They served until the last one was withdrawn in 1976. One of the preserved locomotives in Germany, no. 24 083, had been in service in Poland.

The locomotives were equipped with 3 T 16 and 3 T 17 tenders.

Four Class 24 locomotives have been preserved: three in Germany (24 004, 24 009 and 24 083), and one in Poland (Oi2-29).

See also

Literature

This article is issued from Wikipedia - version of the 7/18/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.