Drammen Heat Pump

Drammen Fjernvarme Heat Pump

The building containing the 14 MW heat pump system.
Country Norway
Location Brakerøya, Drammen
Coordinates 59°44′27″N 10°13′48″E / 59.740833°N 10.23°E / 59.740833; 10.23Coordinates: 59°44′27″N 10°13′48″E / 59.740833°N 10.23°E / 59.740833; 10.23
Status Operational
Commission date 2011
Owner(s) Drammen Fjernvarme
Power generation
Thermal capacity 14 MW
Average generation 67 GWh

Drammen Fjernvarme District Heating is a district heating system in Drammen, Norway, a regional capital some 65km west of Oslo.

The heat pump was manufactured by Star Refrigeration in 2011[1] with 3 systems giving a combined capacity of 14 megawatts to central Drammen[2] providing 85% of hot water needed for the city. The district heating system is owned and operated by Drammen Fjernvarme who have the rights to the concession area given by the Drammen Municipality.[3] This requires all new buildings larger than 1000 m2 to be built with a water-based heating system and connected to the district heating system.

The heat pump uses the natural refrigerant ammonia that has a zero global warming potential and is not a greenhouse gas. The heat source is seawater that is taken in around 8 or 9 °C from a depth of 18 m and is cooled by low pressure liquid refrigerant. Using a vapor-compression refrigeration cycle, the system heats district water from 65 °C to 90 °C for use in building heating and hot water systems. The system has an average coefficient of performance (COP) of 3.0 which means 1 unit of electricity is combined with 2 units of heat from the seawater to provide 3 units of heat to the district heating circuit. With the low cost of hydro-based electricity, it is cheaper to run a heat pump than a gas or electric boiler. In addition, the compressor technology used in the Drammen heat pump is the single screw compressor from Vilter (Emerson). Its internal design allows for balanced forces allowing it to perform with a very long bearing life at more than 120,000 hours for normal refrigeration compressors. [4]

The heat is extracted from a local fjord whose water temperature is around 8 °C. The water is heated from recovered energy at a temperature of 120 °C.[5] A city ordnance requires most new buildings to exploit this form of heating.[6]

References

  1. BBC News, UK; Heat pumps extract warmth from ice cold water
  2. Antony Akilade (20 February 2014). "The Big Interview: Dave Pearson, Star Refrigeration". Herald Scotland. Retrieved 2014-02-28.
  3. District heating with 90% Renewable Energy, Kommunal- og moderniseringsdepartementet, 25 November 2009, retrieved 2014-02-28
  4. Hoffman, & Pearson, D. 2011. Ammonia heat pumps for district heating in Norway 7 – a case study. Presented at Institute of Refrigeration, 7 April, London.
  5. Company Technical document in Norwegian, page 10)
  6. BBC News, UK; Heat pumps extract warmth from ice cold water
This article is issued from Wikipedia - version of the 12/15/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.