Freezing level

The 0°C isotherm under normal conditions

The freezing level, or 0 °C (zero-degree) isotherm, represents the altitude in which the temperature is at 0 °C (the freezing point of water) in a free atmosphere (i.e. allowing reflection of the sun by snow, etc.). Any given measure is valid for only a short period of time, often less than a day.

Above the freezing altitude, the temperature of the air is below freezing. Below it, the temperature is above freezing. The profile of this frontier, and its variations, are studied in meteorology, and are used for a variety of forecasts and predictions. Whilst not given on general weather forecasts, it is used on bulletins giving forecasts for mountainous areas.

Measuring

There are several different methods to examine the structure of the temperature of the atmosphere:

Depending on the frequency and resolution at which these readings are taken, these methods can report the isotherm with greater or lesser precision. Radiosondes, for example, only report a reading twice daily and provide very rough information. Weather radar can detect a variation every five to ten minutes if there is precipitation, and can scan a radius of up to two kilometres.

Characteristics

The isotherm is determined by releasing weather balloons into the atmosphere. This allows a chart to be produced from the data from the balloon.

Typically when referring to freezing levels, if you are at freezing level the Max Temperature will be 0c, though if the freezing level is 200 meters, the sea level ground temperature will be 2 degrees. Temperature changes below freezing level are typically 1 degree Celsius per 100 meters.

The isotherm varies globally as weather conditions vary globally. The measure is important for many reasons. It helps to predict the average temperature, the likelihood of snow and avalanches, and it therefore protects skiers and ski resorts.

Variations in the isotherm

The isotherm can be very stable over a large area. It varies under two conditions:

  1. A change in the density of air due to weather fronts. This changes the isotherm gradually, over tens of kilometres for a cold front, and hundreds for a warm front.
  2. Local levels can be changed by wind, reflection of the sun, snow, and humidity level. These factors can cause the isotherm to change rapidly over several kilometres, in both winter and summer. Also, atmospheric subsidence and ascendence can contribute to variations in the isotherm.

See also

References

This article is issued from Wikipedia - version of the 5/8/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.