GE AC6000CW

GE AC6000CW

A CSX Transportation AC6000CW passing through the New River Gorge, West Virginia in February 2008
Type and origin
Power type Diesel-electric
Builder GE Transportation
Model AC6000CW
Build date 1995–2001
Specifications
AAR wheel arr. C-C
UIC class Co′Co′
Gauge 4 ft 8 12 in (1,435 mm) standard gauge
Wheel diameter 42 in (1,067 mm)
Length 76 ft 0 in (23.16 m)
Width 10 ft 3 in (3.12 m)
Height 16 ft 0 in (4.88 m)
Axle load 72,000 lb (32,658.7 kilograms; 32.7 tonnes) max
Loco weight 423,000–432,000 lb (192,000–196,000 kilograms)
212–216 short tons (189–193 long tons; 192–196 t)
Fuel type diesel fuel
Fuel capacity 5,500 US gal (21,000 l; 4,600 imp gal) or 6,200 US gal (23,000 l; 5,200 imp gal)
Prime mover GE 7FDL16, 7HDL16, GEVO-16 (rebuilds)
RPM range 200 - 1050
Engine type 45° V16, four stroke cycle
Aspiration Twin turbocharger, model 7S1408D
Displacement 251.2 liters (15,330 cu in) (7HDL16, GEVO-16)[1]
175.2 liters (10,690 cu in) (7FDL16)[2]
Alternator GE GMG201
Traction motors GE GEB13 AC
Cylinders 16
Transmission diesel electric
AC Alternator to DC link to AC Traction inverters and Motors
MU working Yes
Loco brake Dynamic and Electropneumatic brake
Train brakes WABCO EPIC 3102 Electropneumatic, others with WABCO 26L pneumatic
Performance figures
Maximum speed 75 mph (121 km/h) (worn wheels)
Power output 6,000 hp (4,500 kW)
Tractive effort Starting: 188,000 lbf (840 kN)
Continuous: 166,000 lbf (740 kN) @ 11.6 mph (18.7 km/h)
Factor of adh. 2.16 to 2.35
Career
Operators CSX Transportation
Union Pacific Railroad
BHP Billiton
Locale North America, Australia

The AC6000CW is a 6,000-horsepower (4,500 kW) diesel electric locomotive built by GE Transportation. This locomotive, along with the EMD SD90MAC, is among of the most powerful single-engined diesel locomotives in the world. The only locomotive to supass them is the dual-engine 6,600-horsepower (4,900 kW) EMD DDA40X.

History

The AC6000CW was designed at the height of a horsepower race between the two major locomotive manufacturers, Electro-Motive Division of London, Ontario and GE Transportation of Erie, Pennsylvania in the early to mid 1990s. The goal was 6,000 horsepower (4,500 kW).

GE partnered with Deutz-MWM of Germany in 1994 to design and construct the 6,250 hp (4,660 kW) 7HDL engine for the locomotives. The first locomotive constructed was the "Green Machine" GE 6000, the nickname due to the green paint scheme. The first production models were also built in 1995: CSX Transportation 600-602, and Union Pacific Railroad 7000-7009. After testing was completed by GE, they were released to their respective owners in late 1996.

Union Pacific Railroad 7391, an example of the 106 "Convertibles" built for Union Pacific Railroad with the 7FDL engine

The initial locomotives suffered from various mechanical problems with the most severe being the engine itself. There were major vibration problems which were addressed by increasing the engine mass to alter the resonant frequency. This in turn caused problems with the twin turbochargers. These problems caused GE to push back full production of the new model until 1998. Changes such as stiffer materials and increased engine wall thickness (to increase mass) were in place at full production.

GE built 106 AC6000CWs for Union Pacific with the older, proven 7FDL engine, rated for 4,400 hp (3,300 kW). These units were originally supposed to be converted to the 6,250 hp (4,660 kW) 7HDL engine after the problems were worked out with the engine, but this never occurred. GE considers these units as AC6000CW "Convertibles," while UP classifies them as CW44/60ACs or AC4460CWs.

The AC6000CW ended production in 2001, although Union Pacific's 75xx series remains in daily use as of 2010, mostly on rock and gravel trains in Texas. Union Pacific designates these units as C60AC, CSX as CW60AC.

CSX Transportation derated most of their AC6000CW units from 6000hp to 4600hp to make them more environmentally friendly. These units are classified as CW46AH.

On June 21, 2001, all eight of the Australian railroad BHP Billiton's GE AC6000s combined to set the world record for the heaviest and longest train. They hauled 99,734 tonnes (98,159 long tons; 109,938 short tons) and 682 wagons for 275 kilometres (171 miles) between Yandi mine and Port Hedland. The train was 7.3 kilometres (4.536 miles) long and carried 82,000 tonnes (81,000 long tons; 90,000 short tons) of iron ore.[3] The record still stands.

Operators

BHP Billiton's AC6000CW 6071 at Finucane Island on the Goldsworthy railway, Western Australia in April 2012, an EMD SD70ACe can be seen at right
Hood end view of CSX Transportation's 627 at Pinner's Point in Portsmouth, Virginia, note the enlarged radiator section overhanging the rear of the unit

In 2013/14 these were replaced by EMD SD70ACes.[6] They were eventually scrapped in late 2014 after BHP couldn't find any buyers who were interested in acquiring the locomotives.[7]

See also

References

Wikimedia Commons has media related to GE AC6000CW locomotives.
  1. Official archived engine description
  2. 7FDL16 Specifications Page 24
  3. BHP breaks its own 'heaviest train' record Railway Gazette 1 August 2001
  4. AC6000 Railpage
  5. Clark, Peter (2012). An Australian Locomotive Guide. Rosenberg Publishing. p. 288. ISBN 9781921719554.
  6. "BHPB Iron Ore Update" Motive Power Issue 91 January/February 2014 page 9
  7. http://www.pilbararailways.com.au/gallery/thumbnails.php?album=142
This article is issued from Wikipedia - version of the 11/20/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.