Gettysburg Formation

Gettysburg Formation
Stratigraphic range: Late Triassic

Outcrop of Gettysburg Formation along Conewago Road in York County, Pennsylvania, facing east from the bridge over Conewago Creek
Type sedimentary
Unit of Newark Supergroup
Sub-units Heidlersburg member,[1][2] Arendtsville fanglomerate lentil,[1] Elizabeth Furnace conglomerate member,[3] Conewago conglomerate member[4]
Overlies New Oxford Formation
Thickness 5000 m (16,000 feet)[1]
Lithology
Primary sandstone, conglomerate
Other shale
Location
Extent Pennsylvania, Maryland
Type section
Named for Gettysburg, Pennsylvania
Named by Stose and Bascom, 1929[1]

The Gettysburg Formation is a mapped bedrock unit consisting primarily of sandstones, conglomerates, and shales.

The Gettysburg Formation was first described in the Gettysburg area of Adams County, Pennsylvania in 1929,[1] and over the following decade was mapped in adjacent York County, Pennsylvania[4] and Frederick County, Maryland.[5] It was then typically called the "Gettysburg shale," and was described as "thick red shales and soft red sandstones." The majority of this early mapping was done by G. W. Stose, A. I. Jonas, and Florence Bascom. Later workers described it as "Red, medium- to fine-grained sandstone and shale."[2]

The rock unit was formalized into a Formation in 1963 by J. D. Glaeser.[6] Glaeser re-mapped some areas previously mapped as the Gettysburg Formation to the Hammer Creek Formation.

A major groundwater resources study of the Gettysburg Formation and other formations of the Newark Supergroup in Pennsylvania was published by Charles R. Wood in 1980.[2]

Depositional Environment

The Gettysburg Formation and other formations of the Newark Supergroup were deposited in the Gettysburg Basin, just one of many Triassic rift basins existing on the east coast of North and South America, which formed as plate tectonics pulled apart Pangaea into the continents we see today.

The conglomerates within the formation were most likely alluvial fan or mudflow deposits, or possibly talus, eroding directly from the Precambrian and early Paleozoic rocks to the north and south.[2] The sandstones and shales were most likely deposited in the flooded rift valley as deltas.

Stratigraphy

Boulder of the conglomerate along Crone Road near the top of the Conewago Mountains (rock hammer for scale)

The Gettysburg Formation is conformably underlain by the New Oxford Formation, which is the basal unit of the Newark Supergroup in south-central Pennsylvania. The Gettysburg is mapped from the Maryland border through Adams, Cumberland, Lancaster, and York Counties to the southern borders of Dauphin and Lebanon Counties. In these counties and to the north the rock unit is called the Hammer Creek Formation.[2]

The Gettysburg Formation is divided into several members. The upper part is sometimes referred to as the Conewago conglomerate, and the Conewago Mountains in York County are underlain by it. The Heidlersburg Member, in the middle of the formation, is "red, green, and gray shale and argillite and minor gray to white sandstone".[2]

Fossils

The palynomorph Froelichsporites traversei has been identified in the Gettysburg Formation.[7]

Age

Relative age dating of the Gettysburg Formation places it in the Late Triassic period.

In 1977, B. Cornet dated a basalt flow near Aspers, Pennsylvania and led to his conclusion that the Gettysburg is of late Carnian and Norian to Early Jurassic age.[8] Later, the rocks above the Aspers Basalt were redefined as the Bendersville Formation of Jurassic age.[9][10]

References

  1. 1 2 3 4 5 Stose, G.W., and Bascom, Florence, 1929, Description of the Fairfield and Gettysburg quadrangles [Pennsylvania]: U.S. Geological Survey Geologic Atlas of the United States, Fairfield-Gettysburg folio, no. 225, 22 p.
  2. 1 2 3 4 5 6 Wood, C. R., 1980, Groundwater resources of the Gettysburg and Hammer Creek Formations, southeastern Pennsylvania: Pennsylvania Geological Survey, 4th ser., Water Resource Report 49, 87 p. (web release).
  3. Jonas, A.I., and Stose, G.W., 1930, Geology and mineral resources of the Lancaster quadrangle, Pennsylvania: Pennsylvania Geological Survey Topographic and Geologic Atlas, 4th series, 168, 106 p., scale 1:62,500
  4. 1 2 Stose, G.W., and Jonas, A.I., 1939, Geology and mineral resources of York County, Pennsylvania: Pennsylvania Geological Survey County Report, 4th series, no. 67, 199 p.
  5. Jonas, A.I., and Stose, G.W., 1938, Geologic map of Frederick County and adjacent parts of Washington and Carroll Counties (Maryland): Maryland Geological Survey County Geologic Map, 1 sheet, scale 1:62,500
  6. Glaeser, J.D., 1963, Lithostratigraphic nomenclature of the Triassic Newark-Gettysburg basin: Pennsylvania Academy of Science Proceedings, v. 37, p. 179-188.
  7. Litwin, R.J., Smoot, J.P., and Weems, R.E., 1993, Froelichsporites gen. nov.; a biostratigraphic marker palynomorph of Upper Triassic continental strata in the conterminous U.S.: Palynology, v. 17, p. 157-168.
  8. Cornet, Bruce, 1977, Palynostratigraphy and age of the Newark Supergroup: Pennsylvania State University, unpublished Ph.D. dissertation, 505 p. abstract
  9. Smoot, J. P, 1999, Stratigraphy and sedimentary tectonics—Early Mesozoic—sedimentary rocks, in Shultz, C. H., ed., The geology of Pennsylvania: Pennsylvania Geological Survey, 4th series, Special Publication 1, p. 180-201.
  10. Faill, R. T., 2003, The early Mesozoic Birdsboro central Atlantic margin basin in the Mid-Atlantic region, eastern United States: Geological Society of America Bulletin, v. 115, p. 406-421. abstract
This article is issued from Wikipedia - version of the 4/23/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.