Immersed tube

Immersed tube type A, built upon a shallow trench on the seabed.
Immersed tube type B, built under the seabed level.
Construction of segments for the second Coen Tunnel in the Netherlands
Tunnel segments sealed off, ready to be floated to site, and sunk into place

An immersed tube is a kind of underwater tunnel composed of segments, constructed elsewhere and floated to the tunnel site to be sunk into place and then linked together. They are commonly used for road and rail crossings of rivers, estuaries and sea channels/harbours. Immersed tubes are often used in conjunction with other forms of tunnel at their end, such as a cut and cover or bored tunnel, which is usually necessary to continue the tunnel from near the water's edge to the entrance (portal) at the land surface.

Construction

The tunnel is made up of separate elements, each prefabricated in a manageable length, then having the ends sealed with bulkheads so they can be floated.[1] At the same time, the corresponding parts of the path of the tunnel are prepared, with a trench on the bottom of the channel being dredged and graded to fine tolerances to support the elements. The next stage is to place the elements into place, each towed to the final location, in most cases requiring some assistance to remain buoyant. Once in position, additional weight is used to sink the element into the final location, this being a critical stage to ensure each piece is aligned correctly. After being put into place the joint between the new element and the tunnel is emptied of water then made water tight, this process continuing sequentially along the tunnel.[2]

The trench is then backfilled and any necessary protection, such as rock armour, added over the top. The ground beside each end tunnel element will often be reinforced, to permit a tunnel boring machine to drill the final links to the portals on land.[2] After these stages the tunnel is complete, and the internal fitout can be carried out.

The segments of the tube may be constructed in one of two methods. In the United States, the preferred method has been to construct steel or cast iron tubes which are then lined with concrete. This allows use of conventional shipbuilding techniques, with the segments being launched after assembly in dry docks. In Europe, reinforced concrete box tube construction has been the standard; the sections are cast in a basin which is then flooded to allow their removal.

Advantages and disadvantages

The main advantage of an immersed tube is that they can be considerably more cost effective than alternative options – i.e. a bored tunnel beneath the water being crossed (if indeed this is possible at all due to other factors such as the geology and seismic activity) or a bridge. Other advantages relative to these alternatives include:

Disadvantages include:

Tubes can be round, oval and rectangular. Larger strait crossings have selected wider rectangular shapes as more cost effective for wider tunnels.

Examples

The first tunnel constructed with this method was the Shirley Gut Siphon, a six-foot sewer main laid in Boston, Massachusetts in 1893. The first example built to carry traffic was the Michigan Central Railway Tunnel constructed in 1910 under the Detroit River. The Marmaray, Istanbul, Turkey, is the world's deepest immersed tunnel. The Fehmarn Belt Fixed Link connecting Denmark and Germany is expected to be completed as the world's longest immersed tunnel[3] in the year 2021.

See also

References

  1. "Engineering Marvels - The Casting Basin". Massachusetts Turnpike Authority. www.masspike.com. Archived from the original on May 12, 2008. Retrieved 2009-06-26.
  2. 1 2 "Technical - Immersed Tube Tunnels". Marmaray Project Website. www.marmaray.com. Retrieved 2009-06-26.
  3. S. Lykke (Project Director, Tunnel, Femern Belt A/S) and W.P.S. Janssen (Senior Project Manager, Tunnel Engineering Consultants, Nijmegen, Netherlands) for the Ramboll-Arup-TEC JV (May 2010). "Innovations for the Fehmarnbelt tunnel Option". TunnelTalk.com. Retrieved cached version, 3 February 2011. Check date values in: |access-date= (help)

5. "Foundation of a tunnel by the sand-flow system", Tunnels and Tunnelling, July, 1973 by A. Griffioen and R. van der Veen

This article is issued from Wikipedia - version of the 7/31/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.