K-factor (fire protection)

In fire protection engineering, the K-factor formula is used to calculate the discharge rate from a nozzle. Nozzles can be fire sprinklers or water mist nozzles, hose reel nozzles, water monitors and deluge fire system nozzles.

K-Factors calculated in Metric units;

The flow rate of a nozzle is given by $q=K{\sqrt {p}}$ ,^[1] where q is the flow rate in litres per minute (LPM), p is the pressure at the nozzle in Bar and K is the K-factor is given in units of $LPM/{\sqrt {\text{bar}}}$ .

K-Factors have also been calculated and published in English units of PSI and GPM. Within the United States, only English measurements are used.

Care should be exercised not to intermix K-factors from Metric and English units as the resulting factors are not equivalent or interchangeable.

References

↑ "K-Factor formula". Canute LLP. 18 Jan 2009. Retrieved 2009-01-18.

^[1]

External links

k-factor calculator Calculate k-factor for a set of fittings, bends, valves etc. in a piping system.

↑ Sources using English K-Factor for fire protection; Engineermate; http://engineermate.com/Hydraulics/FlowTest/KfactorConvert.htm Building codes; http://buildingcoderesourcelibrary.com/ Sprinkler manufacturer who lists both types of K-Factor; http://www.hdfire.com/products/spray_nozzels/medium_velocity_spray_nozzle.htm

This article is issued from Wikipedia - version of the 9/27/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.