Letterpress printing

This article is about the art and technique of relief printing with a printing press. For a historical account of its origins and societal impact, see printing press.
The general form of letterpress printing with a platen press, showing the relationship between the form (the type), the pressure, the ink, and the paper
A printer inspecting a large form of type on a cylinder press. Each of the islands of text represents a single page, the darker blocks are images. The whole bed of type is printed on a single sheet of paper, which is then folded and cut to form many individual pages of a book.

Letterpress printing is a technique of relief printing using a printing press, a process by which many copies are produced by repeated direct impression of an inked, raised surface against sheets or a continuous roll of paper.[1] A worker composes and locks movable type into the "bed" or "chase" of a press, inks it, and presses paper against it to transfer the ink from the type which creates an impression on the paper.

In practice, letterpress also includes other forms of relief printing with printing presses, such as wood engravings, photo-etched zinc "cuts" (plates), and linoleum blocks, which can be used alongside metal type, or wood type, in a single operation, as well as stereotypes and electrotypes of type and blocks.[2] With certain letterpress units it is also possible to join movable type with slugs cast using hot metal typesetting. In theory, anything that is "type high" or .918 inches can be printed using letterpress.[3]

Letterpress printing was the normal form of printing text from its invention by Johannes Gutenberg in the mid-15th century until the 19th century and remained in wide use for books and other uses until the second half of the 20th century. Letterpress printing remained the primary way to print and distribute information until the 20th century, when offset printing was developed, which largely supplanted its role in printing books and newspapers. All forms of data collection were affected by the invention of letterpress printing, as were many careers such as teachers, preachers, physicians and surgeons and artist-engineers.[4] More recently, letterpress printing has seen a revival in an artisanal form.


Printer operating a Gutenberg-style screw press

Johannes Gutenberg is credited with the development in the western hemisphere, in about 1440, of modern movable type printing from individually cast, reusable letters set together in a form (frame or chase). Movable type was first invented in China using ceramic type in 1040 AD. Gutenberg also invented a wooden printing press, based on the extant wine press, where the type surface was inked with leather covered ink balls and paper laid carefully on top by hand, then slid under a padded surface and pressure applied from above by a large threaded screw. It was Gutenburg's "screw press" or hand press that was used to print 180 copies of the Bible. At 1,282 pages, it took him and his staff of 20 almost 3 years to complete. 48 copies remain intact today.[5] This form of presswork gradually replaced the hand copied manuscripts of scribes and illuminators as the most prevalent form of printing.[4] Printers' workshops, previously unknown in Europe before the mid-15th century, were found in every important metropolis by 1500.[4] Later metal presses used a knuckle and lever arrangement instead of the screw, but the principle was the same. Ink rollers made of composition made inking faster and paved the way for further automation.


1917 press room, using a line shaft power system. At right are several small platen jobbing presses, at left, a cylinder press.

With the advent of industrial mechanisation, inking was carried out by rollers that passed over the face of the type, then moved out of the way onto an ink plate to pick up a fresh film of ink for the next sheet. Meanwhile, a sheet of paper slid against a hinged platen (see image), which then rapidly pressed onto the type and swung back again as the sheet was removed and the next sheet inserted. As the fresh sheet of paper replaced the printed paper, the now freshly-inked rollers ran over the type again. Fully automated 20th-century presses, such as the Kluge and "Original" Heidelberg Platen (the "Windmill"), incorporated pneumatic sheet feed and delivery.

Rotary presses were used for high-speed work. In the oscillating press, the form slid under a drum around which each sheet of paper got wrapped for the impression, sliding back under the inking rollers while the paper was removed and a new sheet inserted. In a newspaper press, a papier-mâché mixture called a flong used to make a mould of the entire form of type, then dried and bent, and a curved metal plate cast against it. The plates were clipped to a rotating drum and could print against a continuous reel of paper at the enormously high speeds required for overnight newspaper production. This invention helped aid the high demand for knowledge during this time period.

North American history


Letterpress printing was introduced in Canada in 1752 in Halifax, Nova Scotia by John Bushell in the newspaper format.[6] This paper was named the Halifax Gazette and became Canada's first newspaper. Bushell apprenticed under Bartholomew Green in Boston. Green moved to Halifax in 1751 in hopes of starting a newspaper, as it did not exist in the area. Two weeks and a day after the press he was going to use for this new project arrived in Halifax, Green died. Upon receiving word about what happened, Bushell moved to Halifax and continued what Green had started. The Halifax Gazette was first published on March 23, 1752, making Bushell the first letterpress printer in Halifax, and eventually Canada. There is only one known surviving copy which was found in Massachusetts Historical Society.[7]

United States

One of the first forms of letterpress printing in the United States was Publick Occurrences Both Forreign and Domestick started by Benjamin Harris. This was the first form of a newspaper with multiple pages in the Americas. The first publication of Publick Occurrences Both Forreign and Domestick was September 25, 1690.[8]

Revival and rise of 'craft' letterpress

Proof press, 1850

Letterpress started to become largely out-of-date in the 1980s because of the rise of computers and new self-publishing print and publish methods. Many printing establishments went out of business from the 1980s to 1990's and sold their equipment after computers replaced letterpress's abilities more efficiently. These commercial print shops discarded presses, making them affordable and available to artisans throughout the country. Popular presses are, in particular, Vandercook cylinder proof presses and Chandler & Price platen presses. In the UK there is particular affection for the Arab press, built by Josiah Wade in Halifax. Letterpress recently has had a rebirth in popularity because of the “allure of hand-set type”[9] and the differences today between traditional letterpress and computerized printed text. Letterpress is unique and different from standard printing formats that we are currently used to. Letterpress commonly features a relief impression of the type, although this was considered bad printing in traditional letterpress.[10] Letterpress's goal before the recent revival of letterpress was to not show any impression. The type touched the paper slightly to leave a transfer of ink, but did not leave an impression. This is often referred to as "the kiss"[11] An example of this former technique would be newspapers. Letterpress today has a distinct goal of showing the impression of type, to distinctly note that it is letterpress. Since its revival letterpress is largely has been used for fine art and stationery as its traditional use for newspaper printing is no longer relevant for use.

Letterpress is considered a craft as it involves using a skill and is made by hand. This fine letterpress work is crisper than offset litho because of its impression into the paper, giving greater visual definition to the type and artwork, although it is not what letterpress traditionally was meant for. Today, many of these small letterpress shops survive by printing fine editions of books or by printing upscale invitations, stationery, and greeting cards. These methods often use presses that require the press operator to feed paper one sheet at a time by hand. Today, the juxtaposition of this technique and offbeat humor for greeting cards has been proven by letterpress shops, like Zeichen Press, to be marketable to independent boutiques and gift shops. Briar Press is a community of thousands of printers and artists dedicated to the preservation of letterpress. Some of these printmakers are just as likely to use new printing methods as old, for instance by printing using photopolymer plates on restored vintage presses.

Martha Stewart's influence

Letterpress publishing has recently undergone a revival in the USA, Canada, and the UK, under the general banner of the 'Small Press Movement'. Renewed interest in letterpress was fueled by Martha Stewart Weddings magazine, which began using pictures of letterpress invitations in the 1990s. In 2004 they state "Great care is taken in choosing the perfect wedding stationery -- couples ponder details from the level of formality to the flourishes of the typeface. The method of printing should be no less important, as it can enliven the design exquisitely. That is certainly the case with letterpress.".[12] In regards to having printed letterpress invitations, the beauty and texture became appealing to couples who began wanting letterpress invitations instead of engraved, thermographed, or offset-printed invitations.

A modern letterpress workshop at the Basel Paper Mill, Basel, Switzerland


The movement has been helped by the emergence of a number of organizations that teach letterpress such as Columbia College Chicago's Center for Book and Paper Arts, Art Center College of Design and Armory Center for the Arts both in Pasadena, Calif., New York's Center for Book Arts, Studio on the Square and The Arm NYC, the Wells College Book Arts Center in Aurora, New York, the San Francisco Center for the Book, Bookworks, Seattle's School of Visual Concepts, Olympia's The Evergreen State College, Black Rock Press, North Carolina State University, Washington D.C's Corcoran College of Art and Design, Penland School of Crafts, the Minnesota Center for Book Arts, the International Printing Museum in Carson, CA, Western Washington University in Bellingham, WA, Old Dominion University in Norfolk, VA, and the Bowehouse Press at VCU in Richmond, VA.

Economical materials

Affordable copper, magnesium and photopolymer platemakers and milled aluminum bases have allowed letterpress printers to produce type and images derived from digital artwork, fonts and scans. Economical plates have encouraged the rise of "digital letterpress" in the 21st century, allowing a small number of firms to flourish commercially and enabling a larger number of boutique and hobby printers to avoid the limitations and complications of acquiring and composing metal type. At the same time there has been a renaissance in small-scale type foundries to produce new metal type on Monotype equipment, Thompson casters and the original American Type Founders machines.


The process of letterpress printing consists of several stages: composition, imposition and lock-up, and printing. In a small shop, all would occur in a single room, whereas in larger printing plants, such as with urban newspapers and magazines, each might form a distinct department with its own room, or even floor.


Tools for composing by hand: block of type tied up, a composing stick, a bodkin, and string, all resting in a type galley.
Main article: typesetting

Composition, or typesetting, is the stage where pieces of movable type are assembled to form the desired text. The person charged with composition is called a "compositor" [or typesetter], setting letter by letter and line by line.

Traditionally, as in manual composition, it involves selecting the individual type letters from a type case, placing them in a composing stick, which holds several lines, then transferring those to a larger type galley. By this method the compositor gradually builds out the text of an individual page letter by letter. In mechanical typesetting, it may involve using a keyboard to select the type, or even cast the desired type on the spot, as in hot metal typesetting, which are then added to a galley designed for the product of that process. The first keyboard-actuated typesetting machines, the Linotype and the Monotype, were introduced in the 1890s.[1]

After a galley is assembled to fill a page's worth of type, the type is tied together into a single unit so that it may be transported without falling apart. From this bundle a galley proof is made, which is inspected by a proof-reader to make sure that the particular page is accurate.


A single-page form for printing the front page of the New Testament. The black frame surrounding it is the "chase", and the two objects each on the bottom and left side are the "quoins"
Main article: imposition

Broadly, imposition or imposing is the process by which the tied assemblages of type are converted into a "form" ("forme") ready to use on the press. A person charged with imposition is a stoneman [stonehand], doing their work on a large, flat imposition stone (though some later ones were also of iron [metal]).

More specifically, imposition is the technique of arranging the various pages of type with respect to one another (this is its modern sense). Depending on page size and the sheet of paper used, several pages may be printed at once on a single sheet. After printing, these are cut and trimmed before folding or binding. In these steps, the imposition process ensures that the pages face the right direction and in the right order with the right margins. [Printing forms are put together in multiples of 12 pages. The stonehand arranges the pages in such a way that the folios [page numbers] of facing pages add up to the form's total + 1 {12 + 1 = 13, 24 + 1 = 25 etc.}]

Low-height pieces of wood or metal furniture are added to make up the blank areas of a page. The printer uses a mallet [to strike a wooden block] to level the [raised] type [blocks] to ensure the printing surface is flat.

Lock-up is the final step before printing. The printer removes the cords that hold the type together, and turns the [quoins] with a key or lever to "lock" the entire complex of type, blocks, furniture, and chase (frame) into place—creating what is called a form or forme. The printer takes the finished form to the printing press, [in a newspaper setting, each page needs a truck to be transported, 2 pages need 2 trucks hence the term double truck. The form/page is proofed again] for errors before starting the printing run.


Main article: printing press

The working of the printing process depends on the type of press used, as well as any of its associated technologies (which varied by time period).

Hand presses generally required two people to operate them: one to ink the type, the other to work the press. Later mechanized jobbing presses require a single operator to feed and remove the paper, as the inking and pressing are done automatically.

The completed sheets are then taken to dry and for finishing, depending on the variety of printed matter being produced. With newspapers, they are taken to a folding machine. Sheets for books are sent for bookbinding.

You can distinguish a traditional letterpress printer from a digital printer by its debossed lettering. A traditional letterpress printer made a heavy impression into the stock and producing any indentation at all into the paper would have resulted in the print run being rejected. Part of the skill of operating a traditional letterpress printer was to get the machine pressures just right so that the type just kissed the paper transferring the minimum amount of ink to create the crispest print with no indentation. This was very important as when the print exited the machine and was stacked having too much wet ink and an indentation would have increased the risk of set-off (ink passing from the front of one sheet onto the back of the next sheet on the stack).[13]

Variants on the letterpress

The invention of ultra-violet curing inks has helped keep the rotary letterpress alive in areas like self-adhesive labels. There is also still a large amount of flexographic printing, a similar process, which uses rubber plates to print on curved or awkward surfaces, and a lesser amount of relief printing from huge wooden letters for lower-quality poster work.

Rotary letterpress machines are still used on a wide scale for printing self-adhesive and non-self-adhesive labels, tube laminate, cup stock, etc. The printing quality achieved by a modern letterpress machine with UV curing is on par with flexo presses. It is more convenient and user friendly than a flexo press. It uses water-wash photopolymer plates, which are as good as any solvent-washed flexo plate. Today even CtP (computer-to-plate) plates are available making it a full-fledged, modern printing process. Because there is no anilox roller in the process, the make-ready time also goes down when compared to a flexo press. Inking is controlled by keys very much similar to an offset press. UV inks for letterpress are in paste form, unlike flexo. Various manufacturers produce UV rotary letterpress machines, viz. Dashen, Nickel, Taiyo Kikai, KoPack, Gallus, etc.—and offer hot/cold foil stamping, rotary die cutting, flatbed die cutting, sheeting, rotary screen printing, adhesive side printing, and inkjet numbering. Central impression presses are more popular than inline presses due to their ease of registration and simple design. Printing of up to nine colours plus varnish is possible with various online converting processes.


wooden blocks for English printing

Letterpress can produce work of high quality at high speed, but it requires much time to adjust the press for varying thicknesses of type, engravings, and plates.called Makeready[1] The process requires a high degree of craftsmanship, but in the right hands, letterpress excels at fine typography. It is used by many small presses that produce fine, handmade, limited-edition books, artists' books, and high-end ephemera such as greeting cards and broadsides. Because of the time needed to make letterpress plates and to prepare the press, setting type by hand has become less common with the invention of the photopolymer plate, a photosensitive plastic sheet that can be mounted on metal to bring it up to type high.[1]

To bring out the best attributes of letterpress, printers must understand the capabilities and advantages of what can be a very unforgiving medium. For instance, since most letterpress equipment prints only one color at a time, printing multiple colors requires a separate press run in register with the preceding color. When offset printing arrived in the 1950s, it cost less, and made the color process easier.[14] The inking system on letterpress equipment is the same as offset presses, posing problems for some graphics. Detailed, white (or "knocked out") areas, such as small, serif type, or very fine halftone surrounded by fields of color can fill in with ink and lose definition if Rollers are not adjusted correctly. However, a skilled printer overcomes most of these problems. However, a letterpress provides the option of a wider range of paper, including handmade, organic, and tree-free. Letterpress printing provides a wide range of production choices. The classic feel and finish of letterpress papers takes printing back to an era of quality and craftsmanship. Even the smell of the ink, more apparent on a letterpress-printed page than with offset, may appeal to collectors.

While less common in contemporary letterpress printing, it is possible to print halftone photographs, via photopolymer plates. However, letterpress printing's strengths are crisp lines, patterns, and typography.

Creating artwork

Creating files for letterpress is similar to conventional printing with these exceptions:

Current initiatives

Preparation for the Virgil Scott Letterpress Exhibit at Texas A&M University–Commerce in January 2015
The Virgil Scott Letterpress Exhibit

Several dozen colleges and universities around the United States have either begun or re-activated programs teaching letterpress printing in fully equipped facilities. In many cases these letterpress shops are affiliated with the college's library or art department, and in others they are independent, student-run operations or extracurricular activities sponsored by the college. The College & University Letterpress Printers' Association (CULPA) was founded in 2006 by Abigail Uhteg at the Maryland Institute College of Art to help these schools stay connected and share resources. Many universities offer degree programs such as: Oregon College of Art and Craft, Southwest School of Art, Middle Tennessee State University, School of the Art Institute of Chicago, Indiana University, Miami University, Corcoran College of Art and Design, and Rochester Institute of Technology.[16]

The current renaissance of letterpress printing has created a crop of hobby press shops that are owner-operated and driven by a love of the craft. Several larger printers have added an environmental component to the venerable art by using only wind-generated electricity to drive their presses and plant equipment. Notably, a few small boutique letterpress shops are using only solar power.

In Berkeley, California, letterpress printer and lithographer David Goines maintains a studio with a variety of platen and cylinder letterpresses as well as lithography presses.[17] He has drawn attention both from commercial printers and fine artists for his wide knowledge and meticulous skill with letterpress printing. He collaborated with restaurateur and free speech activist Alice Waters, the owner of Chez Panisse, on her book 30 Recipes Suitable for Framing.[18] He has created strikingly colorful large posters for such Bay Area businesses and institutions as Acme Bread and UC Berkeley.[17]

In London, St Bride Library houses a large collection of letterpress information in its collection of 50,000 books: all the classic works on printing technique, visual style, typography, graphic design, calligraphy and more. This is one of the world's foremost collections and is located off Fleet Street in the heart of London's old printing and publishing district. In addition, regular talks, conferences, exhibitions and demonstrations take place.

The St Bride Institute, Edinburgh College of Art, Central Saint Martins College of Art and Design, The Arts University Bournemouth, Plymouth University, University for the Creative Arts Farnham and London College of Communication, run short courses in letterpress as well as offering these facilities as part of their Graphic Design Degree Courses.

The Hamilton Wood Type and Printing Museum in Two Rivers, Wisconsin houses one of the largest collections of wood type and wood cuts in the world inside one of the Hamilton Manufacturing Company's factory buildings. Also included are presses and vintage prints. The museum holds many workshops and conferences throughout the year and regularly welcomes groups of students from Universities from across the United States.

In 2011 John Bonadies and Jeff Adams created a virtual letterpress that runs on an iPad (and later the Mac) and replicates each step of the letterpress process. LetterMpress was funded from a Kickstarter campaign enabling the developers to collect and digitize wood type from around the world. The app's press is modeled after a Vandercook SP-15 (considered to be a top-of-the-line proof press in its time, and coveted by artists and designers today).

In 2015 a renaissance of letterpress printing by artists is widely acknowledged.[19]

See also


  1. 1 2 3 4 Letterpress Printing. Encyclopædia Britannica. 2014.
  2. Stewart, Alexander A. (1912). The Printer's Dictionary of Technical Terms. Boston, Mass.: North End Union School of Printing. pp. vi–ix.
  3. Kafka, Francis (1972). Linoleum Block Printing. Courier Corporation. p. 71.
  4. 1 2 3 Eisenstein, Elizabeth (2012). The Printing Revolution in Early Modern Europe (2nd ed.). Cambridge University Press. ISBN 978-1107632752.
  5. "Over 600 Years of Printing History". beautyofletterpress.com. Retrieved 17 April 2015.
  6. (2014). Printing and typesetting. Canadian Science and Technology Museum. Retrieved from http://www.sciencetech.technomuses.ca/english/about/printing.cfm
  7. (2014). Halifax gazette - Canada's first newspaper. Nova Scotia Archives. Retrieved from http://novascotia.ca/archives/virtual/gazette/
  8. Breig, James. 2014). Early American newspapering. History. http://www.history.org/Foundation/journal/spring03/journalism.cfm
  9. Holson, Laura. (2006). Retro printers, grounding the laser jet. The New York Times. Retrieved from http://www.nytimes.com/2006/12/10/arts/design/10hols.html?ex=1323406800&en=ee024b5adc6e4fd8&ei=5088&partner=rssnyt&emc=rss&_r=0
  10. (2014). Letterpress printing. Graphic Design. Retrieved from http://www.graphicdesign.com/article/whats-big-deal-about-letterpress/
  11. Franklin, Allison. (2016). Resurgence of the Letterpress, Actually Thanks to the Internet. INK SOLV 30 blog. Retrieved from http://inksolv30.com/blogs/news/82102406-resurgence-of-the-letterpress-actually-thanks-to-the-internet
  12. (2004). Letterpress. Martha Stewart Weddings. Retrieved from http://www.marthastewartweddings.com/225427/letterpress
  13. "Thoughts on traditional letterpress printing". Meridian Press. Archived from the original on November 29, 2014.
  14. Bednar, J.b. (2010). "Making an Impression" (p. 52-58). Businesswest.
  15. "Boxcar Press File Preparation". Boxcar Press. Retrieved 17 April 2015.
  16. Letterpress Commons. "Maltriculated Programs". letterpresscommons.com. Retrieved 17 April 2015.
  17. 1 2 Citrawireja, Melati (July 22, 2015). "A visit with David Goines: Berkeley's legendary letterpress printer and lithographer" (News site). Berkleyside--Berkeley, California's Independent news site. Retrieved 25 July 2015.
  18. Waters, Alice. 30 Recipes Suitable for Framing.
  19. Hoinski, Michael (February 4, 2015). "Artists Find an Audience for Painstaking Letterpress Printing". The New York Times. Retrieved October 1, 2016.

Further reading

Wikimedia Commons has media related to Letterpress printing.


This article is issued from Wikipedia - version of the 11/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.