MTB 1925

MTB 1925
Type Prototype bolt-action rifle
Place of origin Italy Kingdom of Italy
Service history
Wars World War II
Production history
Produced 1925
Number built 3[1]
Specifications
Cartridge 6.5x52mm Carcano
Action Straight-pull bolt action
Feed system 6-round en bloc clip, internal box magazine
Sights V-notch

The MTB 1925 was a prototype semi-automatic rifle of Italian origin. The rifle is fed by en-bloc clips and chambered for the 6.5x52mm Carcano cartridge.[2]

Overview

The MTB 1925 is fed from Carcano M91 clips that fall out of the bottom when the magazine is empty. The magazine follower closely resembles that of the M91. Despite appearing to be semiautomatic, it actually functions as a straight-pull manually-operated bolt action. The massive cylindrical bolt is in two sections of roughly equal size, front and rear. The rear section rotates when the bolt is opened via a spiral cam slot cut into it on the right side (possibly on the left as well, covered by the receiver). The front bolt segment does not turn.

The bolt handle on the right side is engaged only when the large, round knob is pushed in, and functions only to retract the bolt. Forward movement of the bolt comes from a mainspring behind the bolt. There is a long, narrow flat plate on the top of the receiver, which has slight fore-and-aft movement.

References

This article is issued from Wikipedia - version of the 6/18/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.