Mask inspection

In microtechnology, mask inspection or photomask inspection is an operation of checking the correctness of the fabricated photomasks, used, e.g., for semiconductor device fabrication.[1]

Modern technologies for locating defects in photomasks are automated systems that involve scanning electron microscopy and other advanced tools.[2]

Mask data inspection

The term "mask inspection" may also informally refer to mask data inspection step performed before actual writing the real mask.[3] Other methods of inspection use specially constructed light microscope systems such as are available from Probing Solutions Inc. These rely on white light, typically optimized at approximately 538 nM and use incident bright and dark field as well as transmitted bright and dark field illumination to see pin holes, edge defects and many forms of contamination and substrate defects.

References

  1. ↑ "VLSI technology: fundamentals and applications", by Yasuo Tarui, 1986, ISBN 3-540-12558-2, Chapter 4: "Mask Inspection Technology"
  2. ↑ ZEISS Webpage offering automated mask repair tools
  3. ↑ "Design for manufacturability and yield for nano-scale CMOS", by Charles Chiang, Jamil Kawa, 2007, ISBN 1-4020-5187-5, p. 237


This article is issued from Wikipedia - version of the 10/28/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.