Null fill

Null fill is used in radio antenna systems which are located on mountains or tall towers, to prevent too much of the signal from overshooting the nearest part of intended coverage area. Phasing is used between antenna elements to take power away from the main lobe and electrically direct more of it at a more downward angle in the vertical plane. This requires a phased array. Changing the relative power supplied to each element also changes the radiation pattern in this manner, and often both methods are used in combination.

References

See also

This article is issued from Wikipedia - version of the 4/30/2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.