PKP class EP02

EP02

EP02 locomotive
Type and origin
Power type Electric
Builder Pafawag
Build date 1953-1954
1957
Total produced 8
Specifications
UIC class Bo'Bo'
Gauge 1,435 mm (4 ft 8 12 in) standard gauge
Driver dia. 1,100 mm (43.31 in)
Length 15,000 mm (49 ft 2 12 in)
Width 3,070 mm (10 ft 78 in)
Height 5,411 mm (17 ft 9 in)
Loco weight 81 t (80 long tons; 89 short tons)
Fuel capacity 2,840 L (620 imp gal; 750 US gal)
Electric system(s) 3000 V DC Catenary
Current collection Pantograph
Engine type MV-185R
LKa-635
Transmission 69:22
78:31
Loco brake Knorr
Train brakes Air
Performance figures
Maximum speed 100 km/h (62 mph)
Power output 1,650 kW (2,210 hp)
1,600 kW (2,100 hp)
Tractive effort 228 kN (51,000 lbf)
Career
Operators PKP
Class EP02
Locale Poland

EP02 is a name for a Polish electric locomotive. It was made for passenger transport purposes.

Technical features

Few improvements were brought in with this locomotive type. The front and back of the box had dragging and bumping devices installed. The whole body was given a more aerodynamic shape compared to previous models. This machine is of Bo-Bo type, meaning that each axle is powered separately. The axles are installed in pairs on two bogies. The bogies had lighter, welded construction which gave the whole vehicle better contact with the rails.

The engines used in EP02 were not modern ones, and had a large weight compared with power and small rotation. The engine contained two engineer's compartments on each end, with all the devices necessary for running the locomotive inside. The engine and high voltage compartments were situated in the middle part of the body.

History

After World War II almost no electric locomotives survived in Poland, and local industry was not yet able to start the production of such vehicles. The solution for this problem was sought mainly abroad and resulted in a decision to buy some components from England. The design for EP02 by Central Rail Industry Construction Office in Poznań was ready in 1951.

Introduction

In 1951 the design was sent to Pafawag, but the construction met with a few obstacles, mainly lack of material and parts. The first locos were directed into Warsaw-Ochota railway district in 1953. Soon many construction faults appeared, like wheel spinning after reaching 70 km/h (43 mph) speed, inconstant drive and vertical shakes. The faults were systematically corrected, and the experience was used during designing the ET21 and EU06.

Production

Loco nos. Producer Years of prod. Quantity
01-07 Pafawag 1953–1954 7
08 Pafawag 1957 1

Operation

All the EP02s initially operated in Warsaw, but soon were moved to Łódź. Once there were enough EU07s, all EP02s were moved to Dębica. In 1971 the last three machines were retired and reassigned to work as heating power supplies (used solely to supply electric power from overhead to heat cars during longer stops at stations, it involved parking them at selected stations and removal of most of the electric, brake and control equipment, retaining only the pantographs and switches associated with the HEP supply). This prolonged EP02s’ life by 24 years—EP02-07 was working as a heating power supply in Zakopane until 1992 and EP02-08 in Przemyśl until 1996.

During the operation, the locomotives were modified by the addition of automatic brakes and heating systems.

Locomotive assignment

Loco nos. Operator Remarks
07 Chabówka - heritage park
02 Warsaw - railroad museum
08 Kraków

See also

This article is issued from Wikipedia - version of the 2/14/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.