Paul Cornu

French engineer Paul Cornu in his first helicopter in 1907. Note that he is sitting between the two rotors, which rotated in opposite directions to cancel torque. This helicopter was the first flying machine to have risen from the ground using rotor blades instead of wings.
Full length photograph of the Cornu helicopter.

Paul Cornu (French pronunciation: [pɔl kɔʁny]; June 15, 1881 – 6 June 1944) was a French engineer.

Career

French engineer Paul Cornu made history by designing the world's first successful manned rotary wing aircraft.

Cornu first built an unmanned experimental design powered by a 2 hp Buchet engine.[1]

His manned helicopter was powered by a 24 horsepower (18 kW) Antoinette engine.[2] He piloted this construction himself at Normandy, France on November 13, 1907.[3] Previously, a French helicopter, the Breguet-Richet Gyroplane I, had managed to lift off under its own power, but it had been held in position by men standing on the ground. Cornu's performance was a considerable progress because his aircraft flew without additional support and lifted Cornu about 30 cm (1 ft) for 20 seconds . Unfortunately this early helicopter was scarcely maneuverable and had only a few additional flights. The construction was not much further developed by this technical pioneer, who had to keep on making a living by manufacturing bicycles.

Death

Paul Cornu died in 1944 in Lisieux, France, when his home was destroyed during the bombardent by the Allies that accompanied the landings of WW2.

References

  1. "Hélicoptère Cornu et fils à Propulseur Spécial". L'Aérophile (in French): 146. June 1906.
  2. eurocopter.com
  3. Gibbs-Smith, Charles H. (3 Apr 1959). "Hops and Flights: A roll call of early powered take-offs". Flight. 75 (2619): 470. Retrieved 24 Aug 2013.

External links

This article is issued from Wikipedia - version of the 10/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.