Pilatus PC-8D Twin Porter

PC-8D Twin Porter
Role STOL Light transport
National origin Switzerland
Manufacturer Pilatus Aircraft
First flight 28 November 1967
Status Scrapped
Number built 1
Developed from Pilatus PC-6

The Pilatus PC-8D Twin Porter was a Swiss ten-seat light transport built by Pilatus Aircraft. The type did not go into production and only one was built.[1]

Work on the Twin Porter started in 1966, it was a modified Pilatus PC-6 high-wing monoplane with the nose-mounted engine removed and two 290 hp Lycoming IO-540-GIB engines mounted on the wing leading edges.[2] The prototype first flew on 28 November 1967.[3] Only one aircraft was built since flight testing was halted in 1969. The aircraft was scrapped.

Development

To keep development costs down, as many components as possible were adopted from the single-engine PC-6 Porter, such as the center fuselage, the wings and main landing gear. There was a new development of the forward fuselage, also with the tail and the arrangement of the propellers. The cabin was easily converted for various tasks. First drafts showed a motor assembly right and left of the fuselage nose, similar to the Dornier Do 28. A tandem arrangement of the engines like on the Dornier Wal above the fuselage, as with the earlier flying boats, was considered. In the final design, the engines were located very close, in front of the wings, to the fuselage with separate engine pylons. There was no fixed connection between the engines and the wings, but a gap as in a slat. With this arrangement, it was hoped to obtain favorable values for single-engined flight.

Flight testing

On 28 November 1967 Hans Galli made the first flight with the prototype of the PC-8D with the registration HB-KOA. The results from more than a year of flight testing were not satisfactory, so they abandoned the project at the end of January 1969. Because of the lack of single-engine performance, approval by FAR23 was not possible. The PC-8D Twin Porter was presented also at the international air show in Paris. The only aircraft built was scrapped after the project. Simultaneously, Pilatus began the development of the training aircraft PC-7 powered by a turboprop engine. This made it possible to retrofit existing piston-engined Pilatus Porters with turboprop engines, with minimal changes to the airframe. The desired higher power of the twin PC-8D was achieved with lower operating and maintenance costs. A PC-8 with twin turboprop engines was considered, but was abandoned due to lack of market demand.

Specifications

Data from Flight International[3]

General characteristics

See also

External images
Pilatus PC-8 Twinporter
Pilatus PC-8A Plan
Pilatus PC-8D Plan
Related development
Aircraft of comparable role, configuration and era

References

Wikimedia Commons has media related to Pilatus PC-8.
  1. Pilatus Aircraft Ltd – Chronicle, retrieved 12 January 2013
  2. Harrison, Neil (23 November 1967). "Commercial Aircraft Survey". Flight International. p. 869. Retrieved 12 January 2013.
  3. 1 2 "World News: Twin Porter Revealed". Flight International. 28 March 1968. p. 434. Retrieved 12 January 2013.
This article is issued from Wikipedia - version of the 10/10/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.