Russon

Russon Minicar
Overview
Manufacturer Russon Cars Ltd
Production 1951-1952
Body and chassis
Class microcar
Body style 2-door coupé
Powertrain
Engine 250 cc Excelsior
Transmission 3 speed manual

The Russon was a British microcar with a sporting appearance and built by Russon Cars Ltd in Eaton Bray, Stanbridge, Bedfordshire between 1951 and 1952.[1]

Brain-child of D.A. Russell, the editor of the Aeromodeller magazine and designed by Derek Currie[2] the Russon was at first powered by a rear mounted 197 cc JAP engine but production cars used a larger 250 cc twin from Excelsior. Drive was to the rear wheels through a motor cycle type 3 speed gearbox. The suspension was independent all round by coil springs and the body was mounted on a tubular chassis frame. 50 mph (80 km/h) and 65 mpg were claimed.

The alloy panelled body was built on an ash frame in a traditional coachbuilders manner and was styled to look like a bit like a miniature Jaguar XK120. There was said to be room for 3 people to sit side by side. The car was killed by its high price of £491, for which a "normal" family saloon could be had and less than 10 were made.

The assets of this company were acquired by Air Vice Marshal D.C.T. Bennett in preparation for his project, the Fairthorpe Cars.[2]

See also

References

  1. Sedwick, Michael; Mark Gillies (1993). A-Z of Cars 1945-1970. Bay View Books. ISBN 1-870979-39-7.
  2. 1 2 Marshall, Tony (1999). Microcars. Sutton's Photographic History of Transport. Gloucester: Sutton Publishing Limited. ISBN 0-7509-2082-3.


This article is issued from Wikipedia - version of the 7/24/2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.