Maltese Falcon (yacht)

This article is about the yacht. For other uses, see The Maltese Falcon (disambiguation).
Maltese Falcon
History
 Malta
Name: Maltese Falcon
Namesake: The Maltese Falcon
Owner:
Operator: Pleon Ltd., Tortola, BVI
Builder: Perini Navi, Tuzla, İstanbul
Launched: 1990
Completed: 2006-02-06
Identification: IMO9384552
Yacht design:Dijkstra & Partners
General characteristics [2]
Type: sailing yacht
Tonnage: 1157 (GT)
Displacement: 1,240 t (1,220 long tons; 1,367 short tons)
Length: 88.10 m (289 ft)
Beam: 12.60 m (41 ft)
Height: 58.20 m (191 ft)
Draught: 6.00–11.00 m (20–36 ft)
Propulsion: 2 × 1,524kW Deutz TBD 620 V12 at 1,800rpm
Sail plan:
  • self-standing three-mast square rigger
  • sail area 2,396 m2 (25,790 sq ft)
Capacity: 12 guests
Crew: 18 persons

Maltese Falcon is a full rigged ship which was built by Perini Navi in Tuzla, İstanbul, and commissioned by her first owner Tom Perkins. She is one of the world's most complex and largest sailing yachts at 88 m (289 ft), similar in size to the Athena and Eos. The vessel dropped her BVI flag in 2008 and was purchased by Pleon Ltd, which put her to charter use.[3] Famous charterers include actors Tom Hanks and Hugh Jackman,[4] and Google-co founder Larry Page.[5]

Vessel

Maltese Falcon under sail (2008)

The bare hull was built and launched on speculation in 1989-1990 by Perini Navi at its newly acquired shipyard in Tuzla, İstanbul but found no takers in the aftermath of the Gulf War. Tom Perkins, a keen yachtsman and the owner of the two Andromeda La Dea Perini ketchs, took an interest in the hull. In 2001 he hired Dutch yacht designers at Dykstra & Partners to investigate 19th century clippers and propose a three-mast square rig for the project. The "Dynarig" concept, a 1960s invention by German hydraulics engineer Wilhelm Prölss intended to operate cargo ships with a fuel-saving philosophy and as few crew as possible, met with Perkins' approval and the project was signed into build in Tuzla. The three self-standing rotating carbonfiber masts were not a Perini Navi deliverable; they were manufactured and fitted to the yacht at the Perini Navi premises in Tuzla under the direct responsibility of Perkins and the supervision of Insensys, Ltd, a British carbonfiber specialist. Ken Freivokh designed the vessel's interior decoration and Perini Navi fitted her out.

The yacht is easily controlled and has been seen to sail off her anchor and away from berths within harbors. The yacht's sophisticated computer detects parameters such as wind speed automatically and displays key data. An operator must always activate the controls, yet it is possible for a single person to operate the yacht. In a radio interview for the BBC World Service's Global Business programme broadcast in December 2007, Perkins claimed that he personally wrote some of the yacht's unique control software.

On 4 November 2007, in a 60 Minutes profile, Perkins suggested the yacht cost more than $150 million, but less than $300 million, refusing to be more specific.[6]

Rig

Maltese Falcon' masts

Damon Roberts of Insensys, Ltd. was responsible for designing and manufacturing the DynaRig of Maltese Falcon at the Perini Navi premises in Tuzla, İstanbul. The design, testing and manufacturing of the system was completed over a three-year period. Exhaustive finite element analysis and carbon fiber testing were carried out to ensure that the complete assembly would sustain the loads under sail.

At a cost of 80 million dollars, the DynaRig owes its origin to Wilhelm Prölss' research in the 1960s. The DynaRig consists of freestanding rotating masts with rigid yardarms and acts as a square rig. Each of Maltese Falcon's masts supports six yardarms, which, unlike a conventional square rigger, have built-in camber of 12%. The fifteen square sails are set between the yardarms in such a way that when deployed there are no gaps in the sail plan of each mast, enabling them to act as a single airfoil. The furling sails are stored in the mast and can be deployed along tracks on the yardarms in 6 minutes. The sails are trimmed by rotating the masts. As there is no rigging, the masts and yardarms can be rotated without restriction for all points of sail, making Maltese Falcon a capable upwind clipper.

The length of the masts measures approximately 57 m (187 ft) above the bottom bearing. As the rig can be tacked to allow flow in both directions, the mast rotates about deck and keel bearings and have symmetrical elliptical sections for better aerodynamics in both flows.

Insensys also incorporated a fiber optical strain monitoring system into the spars to analyse real time loads under sail. A fiber Bragg grating system was embedded during wet layup of the carbonfiber structure. The loads are transmitted to the bridge monitors.

Prizelist

Maltese Falcon has received industry prizes from shipowners and the press. She has also won the Perini Navi Cup regattas on two occasions as well as the Palma Superyacht Cup in 2010.[7]

History

Maltese Falcon was involved in a collision on October 4, 2008, with a 40 ft (12 m) sloop while sailing on the San Francisco Bay during the Leukemia Cup.[8]

Maltese Falcon was still listed for sale in 2009 by Camper & Nicholsons with an asking price of €115m and 1,899 hours logged on the engines[7] when it was reported that she had already dropped flag in 2008[9] and been sold by Burgess who listed her for €70m.[10]

See also

Notes

Further reading

This article is issued from Wikipedia - version of the 11/11/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.