Tube cleaning (locomotive)

Tube cleaning is the process whereby the boiler tubes of steam locomotives are cleaned out, removing soot and ash in order to ensure the effective generation of the draught for the fire. This was often done with steam lances or compressed air and accompanied by brushing as required.

United Kingdom

During the 1930s some UK locomotives were fitted with steam operated tube-cleaning guns, sometimes referred to as anti-carbonisers. It was possible to direct sand, under steam pressure, to any part of the rear tube plate from a lever in the cab.[1]

Germany

In Germany too, locomotive sheds often had tube cleaning equipment (Rohrblasgerüst) which was used to blow through the boiler tubes. This tube cleaning, carried out by a steam lance, had to be done once a week. Residue left in the fire and smoke tubes not only reduced the transfer of heat from the hot smoke gases to the water in the boiler, but also accelerated corrosion of the tubes.[2]

See also

References

  1. Eureka encyclopedia article: The Locomotive Depot
  2. German Wikipedia Rohrblasgerüst

Literature

Ransome-Wallis, P. (1959). Illustrated Encyclopedia of World Railway Locomotives (2001 republication ed.). Dover Publications, Inc. ISBN 0-486-41247-4. 

This article is issued from Wikipedia - version of the 10/4/2013. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.