Wills Wing XC

XC
Wills Wing XC at the Canada Aviation and Space Museum
Role Hang glider
National origin United States
Manufacturer Wills Wing
Introduction 1977
Status Production completed
Produced 1977-1980


The Wills Wing XC (Cross Country) is an American high-wing, single-place, hang glider that was designed and produced by Wills Wing of Santa Ana, California. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.[1]

The XC was Wills Wing's third hang glider model produced.[1]

Design and development

The aircraft is made from aluminum tubing, with the single-surface wing covered in Dacron sailcloth and cable braced from a single kingpost.[1]

The XC models are each named for their rough wing area in square feet.[1]

Variants

XC-132
Very small-sized model for lighter pilots. Pilot hook-in weight range is 120 to 220 lb (54 to 100 kg).[2]
XC-142
Small-sized model for lighter pilots. Pilot hook-in weight range is 140 to 240 lb (64 to 109 kg).[2]
XC-155
Mid-sized model for medium-weight pilots. Pilot hook-in weight range is 170 to 280 lb (77 to 127 kg).[2]
XC-185
Large-sized model for heavier pilots. The wing has a span of 10.9 m (35.8 ft). The glider empty weight is 25 kg (55 lb).[1]

Aircraft on display

Specifications (XC-185)

Data from Canada Aviation and Space Museum[1]

General characteristics

References

  1. 1 2 3 4 5 6 Canada Aviation and Space Museum (2016). "Wills Wing XC-185". Retrieved 7 March 2016.
  2. 1 2 3 Wills Wing Support. "Hang Glider Placard Specifications". Wills Wing. Retrieved 8 March 2016.
This article is issued from Wikipedia - version of the 3/8/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.