Uster Technologies

For other uses, see Uster (disambiguation).
Uster Technologies Ltd.
[Subsidiary]
Industry industrial engineering and manufacturing
Founded 2003 through management buy-out; origins from 1875
Headquarters Uster, Switzerland
Area served
Worldwide
Key people
Dr. Geoffrey Scott (CEO), Philip Mosimann (Chairman of the board)
Website www.uster.com


Uster Technologies, in its industry often called Uster, is a Swiss manufacturer of analytical instruments and on-line monitoring systems for the textile industry, based in Uster, Switzerland. It emerged as a management buy-out form of the Zellweger Luwa Group in 2003. From 2007 until 2012 the company was publicly traded and listed on the main segment of SIX Swiss Exchange. Since 2012 Uster Technologies is a subsidiary of Toyota Industries Corporation.

Products and services

Uster Technologies mainly produces laboratory and on-line systems used to measure and control the quality of fibers and yarns.

For cotton ginning, classing and trading

Modern, industrial cotton gins often operate with sensors by Uster, to control their process and to the resulting fiber quality.

Cotton classing is required to measure and classify each cotton bale according to its specific physical attributes. Measurement information produced by Uster's HVI (High Volume Instrument) covers following parameters: fiber length, length uniformity, fiber strength, fiber maturity, short fiber content, micronaire (fiber fineness), color grade, leaf and extraneous matter.

When cotton is traded, its value is determined by the above-mentioned quality parameters, as measured by the HVI in the classing agencies. Hence Uster's HVI has defined a set of standards for a large part of all cotton trades worldwide.[1]

For yarn production

Uster products are used in the spinning mill for measuring and analyzing the quality of the raw materials (i.e., fibers of different materials), intermediate products (i.e., sliver, roving) and final product (i.e., yarn) along their entire manufacturing process.

Most important process parameters a spinning mill has to control are: quality of the incoming fibers, yarn evenness, hairiness, tensile strength and elongation, contamination with disturbing materials, twist, friction, etc. By measuring these parameters, the instruments can be used as tools for a mill-wide quality assurance process.[2]

An overview of Uster products applied in the spinning mills:

While developing these different testing instruments, often the first of their kind, Uster also had to invent either the measuring method or the suitable measurement parameters.[3] Some examples:[4]

Measurement Object Parameter Explanation Instrument
Cotton fibers Neps Number of neps per gram AFIS
Cotton fibers Neps Mean size of neps (μm) AFIS
Cotton fibers Immature fibers Immature fiber content (in %) AFIS
Yarn Uster Evenness Coefficient of yarn mass variation Uster Tester
Yarn Imperfections Thick places, thin places and neps Uster Tester
Yarn Uster Hairiness Total length of protruding fibers per sensor length Uster Tester
Yarn Weak places at 400m/min Strength of one percent of the weakest values Uster Tensojet

For comparing such quality parameters in the spinning laboratory with those of other spinning mills worldwide, Uster established a number of benchmarks. The first so-called "Uster Statistics" were introduced in 1957 and have been periodically updated to account for the technical and regional changes in the industry. These statistics are an important element in the trading of yarns, as they allow yarns to be objectively specified and referred to a worldwide quality level.

Uster Technologies also runs the Usterizing certification program for spinning mills.

History

References

  1. "US cotton standards". United Nations Conference on Trade and Development.
  2. "Efficient Yarn Production". Textile World.
  3. "Obituary of Dr. h.c. Hans Locher, former General Director and Chairman of the Board of Zellweger Uster Ltd.". The Textile Institute. Retrieved 2009-12-18.
  4. "Quality parameters measured by Uster Technologies equipment" (PDF). Uster Technologies Ltd. Archived from the original (PDF) on 2011-07-17. Retrieved 2009-12-18.
Wikimedia Commons has media related to Uster Technologies.
This article is issued from Wikipedia - version of the 12/3/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.