NER Class S1

NER Class S1
LNER Class B14
Type and origin
Power type Steam
Designer Wilson Worsdell
Build date 1900-1901
Total produced 5
Specifications
Configuration 4-6-0
Leading dia. 3 ft 7 14 in (1.099 m)
Driver dia. 6 ft 8 14 in (2.038 m)
Wheelbase 27 ft 6 in (8.38 m) engine
12 ft 8 in (3.86 m) tender
51 ft 6 34 in (15.716 m) total
Axle load 19.5 long tons (19.8 t)
Loco weight 67.1 long tons (68.2 t)
Tender weight 41.1 long tons (41.8 t)
Total weight 108.2 long tons (109.9 t)
Firebox:
  Firegrate area
23 sq ft (2.1 m2)
Boiler 4 ft 9 in (1.45 m)
Boiler pressure 175 psi (1.21 MPa)
Heating surface 1,750 sq ft (163 m2)
  Tubes 935 sq ft (86.9 m2)
  Flues 401 sq ft (37.3 m2)
  Firebox 120 sq ft (11 m2)
Superheater:
  Heating area 294 sq ft (27.3 m2)
Cylinders 2 (outside)
Cylinder size 20 in × 26 in (510 mm × 660 mm)
Valve gear Stephenson
Performance figures
Tractive effort 19,310 lbf (85.9 kN)
Career
Operators North Eastern Railway, London & North Eastern Railway
Disposition all scrapped

The NER Class S1 (LNER Class B14) was a class of 4-6-0 steam locomotives of the North Eastern Railway. It was designed by Wilson Worsdell and five locomotives were built between 1900 and 1901 at Gateshead works. The S1 was similar to the NER Class S but had larger driving wheels and a higher boiler pressure.[1]

Modifications

Schmidt superheaters and longer smokeboxes were fitted between 1913 and 1917.

Use

When built, the S1s hauled heavy passenger expresses between York, Newcastle, and Edinburgh. They were gradually replaced on these services by NER Class R and NER Class R1 4-4-0s. From 1907, they were mainly used for hauling fish trains.

Withdrawal

All five locomotives were withdrawn between 1929 and 1931 and none is preserved.

References

  1. http://www.lner.info/locos/B/b14.shtml
This article is issued from Wikipedia - version of the 2/4/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.